Pinpoint your favorite waypoints and track fish with a fishfinder from Academy Sports + Outdoors. With a detailed black-and white LCD display, you can clearly spot fish as deep as 1,000' as well as track their location with depth finder technology. Water temperature sensors allow you to monitor the biological patterns of prospective catches, letting you pinpoint where they'll be at any time of day. With a waterproof casing, our selection of fishfinders are designed for use on boats or kayaks. Our giant boating and marine shop has an assortment of marine electronics from popular brands, like Humminbird, Garmin marine and Lowrance, can help you reel in the largest catch. Receive notifications for certain depths and types of fish, as well as sonar and mapping software, so you can find exactly what you're looking for.
Fishing nets are meshes usually formed by knotting a relatively thin thread. Between 177 and 180 the Greek author Oppian wrote the Halieutica, a didactic poem about fishing. He described various means of fishing including the use of nets cast from boats, scoop nets held open by a hoop, and various traps "which work while their masters sleep". Ancient fishing nets used threads made from leaves, plant stalk and cocoon silk. They could be rough in design and material but some designs were amazingly close to designs we use today (Parker 2002). Modern nets are usually made of artificial polyamides like nylon, although nets of organic polyamides such as wool or silk thread were common until recently and are still used.

Best of all though, the Helix 7 is a complete package, and includes underwater sonar transducer and all necessary mounting hardware for quick and easy installation on your boat. All you need to do is power up the device, toss the transducer in the water, and wait for sonar returns to start rolling in. Make every fishing expedition a trophy winner with the Humminbird Helix 7 CHIRP DI GPS G2 Fishfinder.

Hand nets are held open by a hoop, and maybe on the end of a long stiff handle. They have been known since antiquity and may be used for sweeping up fish near the water surface like muskellunge and northern pike. When such a net is used by an angler to help land a fish it is known as a landing net.[12] In the UK, hand-netting is the only legal way of catching glass eels[13] and has been practised for thousands of years on the River Parrett and River Severn.
Hockey tape was made for the ice, and even though hard-water anglers are looking for a different kind of score, they should always have a roll on hand. A few wraps around the butt and foregrip of any jigging rod immediately improves the hold and comfort, but hockey tape can be used on any ice tool. If you’ve ever had the cheap rubber handle cover disappear from your ice scooper, you know the feeling of metal freezing to a glove or the burning sting of touching it with your bare hand. A few wraps of hockey tape can easily fix that. Should your bibs or jacket get hooked or ripped, the hockey tape will keep a tear from getting worse until you can make a permanent repair.
Simrad’s GO9 XSE Combination GPS/ Fishfinder offers a networkable 9” Touchscreen unit at an affordable price point. An Internal 10Hz GPS Receiver quickly and accurately locates position on the included C-Map Pro Charting while the included TotalScan Transom Mount Transducer provides detailed underwater images. Compatible with detailed mapping from C-MAP MAX-N, Navionics, Insight, Insight Genesis, and NV Digital Charts.
Setting your tip-up baits at the proper depth requires a little work. Then every time you catch a fish or check your bait, you need to reset them. If you’ve got a few nickel-size buttons, those resets become no chore at all. Start by running your main line through one hole in the button and out another. This should allow you to move the button up and down the line easily, but provide enough tension to stop it from sliding on its own. Next, attach your egg sinker, barrel swivel, leader, and hook to the line. Once your depth is set, simply slide the button down to the water’s surface, and then reel the button up to the tip-up’s line guide. Now every time you reset your line after catching a fish or changing bait, wind the spool until the button is at the tip-up guide. Your bait will be set in the same place within the water column every time.

If you click the "add to Cart Button" on our website, information on accessories, shipping prices and more will be provided. Please note that clicking on the "add to cart" button only places the item in your "shopping cart" there is no obligation to buy unless you complete the ordering process. At the GPS Store, Inc. we always strive to provide our customers with great value. We believe that our combination of price, knowledge and customer service is the best that you will find anywhere.


Hand nets are held open by a hoop, and maybe on the end of a long stiff handle. They have been known since antiquity and may be used for sweeping up fish near the water surface like muskellunge and northern pike. When such a net is used by an angler to help land a fish it is known as a landing net.[12] In the UK, hand-netting is the only legal way of catching glass eels[13] and has been practised for thousands of years on the River Parrett and River Severn.
The temperature and pressure sensitivity capability of fish finder units allow one to identify the exact location of the fish in the water by the use of a temperature gauge.Functionality present in many modern fish finders also have track back capabilities in order to check the changes in movement in order to switch position and location whilst fishing.

Kiss has collectable action figures. Does Madonna have action figures? Eh, better not answer that one. Back in the day, I was a member of the Kiss Army. What sort of fan club does Madonna have? Better step away from that one too. Pluto will always be a planet to me, and Kiss is already in *my* rock and roll hall of fame. I love the smell of flamethrowers and flash pots in the morning … smells like … victory.
Understanding how a fish finder works will help you to understand how to use it. Fish finders work using sonar. It’s a technology that uses sound waves to display underwater objects. The fish finder produces the sound wave and with the transducer sends it through the water. Penetrating the water deeper, the sound wave starts to spread in the form of a cone (commonly called a beam). As the wave encounters objects within this beam, it sends the signal back to the transducer.
The thickness of the line representing the bottom is also a great clue to bottom hardness. Here the rule is simple – the thicker the line, the harder the bottom. But, be careful – sonar sensitivity can affect how thick the line is. The Deeper display has adjustable sensitivity. So if you turn up the sensitivity to 100%, the bottom line may appear thicker, if you turn it down to 10% it may appear thinner. So practice adjusting the sensitivity and get used to judging how much the bottom thickness varies based on this.

More pixels per square inch will provide better detail of structures, a better representation of what’s below you, and improved split-screen images. More pixels—higher screen resolution and a big screen—allow you to see the air bladders of smaller fish, see fish near the bottom, separate closely spaced targets from one another, and to see fish on the edges of “bait balls.” But remember: the contrast of the display must also be sharp in order to use the resolution. Like many features, you get what you pay for with display resolution—the more the better.
Kiss has collectable action figures. Does Madonna have action figures? Eh, better not answer that one. Back in the day, I was a member of the Kiss Army. What sort of fan club does Madonna have? Better step away from that one too. Pluto will always be a planet to me, and Kiss is already in *my* rock and roll hall of fame. I love the smell of flamethrowers and flash pots in the morning … smells like … victory.
The sound wave spreads as it gets further from the transducer. The wider the cone, the larger the coverage area, but the as the cone angle spreads, sensitivity diminishes. A 20-degree cone is considered a versatile angle for fishers who frequent different water depths. More advanced devices come with double and triple beams, ideal for scanning deep water depths.
More pixels per square inch will provide better detail of structures, a better representation of what’s below you, and improved split-screen images. More pixels—higher screen resolution and a big screen—allow you to see the air bladders of smaller fish, see fish near the bottom, separate closely spaced targets from one another, and to see fish on the edges of “bait balls.” But remember: the contrast of the display must also be sharp in order to use the resolution. Like many features, you get what you pay for with display resolution—the more the better.
However, fish finders for professional use, i.e., those used by commercial fishermen, can make use of other frequencies. Such frequencies include 15, 22, 28, 38, 45, 50, 68, 75, 88, 107, 150 and 200 kHz. There are some special fish finders that utilize the frequency of 400 kHz, but it is quite a rare case. As you can see, there is an extensive range of configurable frequencies available for fish finders for fishery vessels, and a fish finder generally makes use of a combination of two frequencies (high and low frequencies). The selection of the frequencies depends upon the intended purposes of the fish finder, which include, inter alia, finding specific fish species; grasping the seabed condition; conducting a wide-area-search with the search angle of 90 degrees at one go; conducting detailed search for fish schools; detecting fish schools that give weak echo returns; avoiding interference/conflict with other fish finders used nearby. The searchable range (depth) and search area are dependent upon the frequency used. On the one hand, high frequency ultrasound is suitable for a detailed search, although it cannot be used for search in deep water. Low frequency ultrasound, on the other hand, is suited for general searches in a wider area as well as searching in deep water.
It’s no secret that HDS displays are used by more tournament fishing pros than all other fishfinding brands combined, so we didn’t have to go back to the drawing board to build it; we just made the best fishfinder/chartplotter in the world even better. HDS LIVE  delivers premium performance and support for the best collection of innovative sonar features available – from Active Imaging™, StructureScan® 3D, FishReveal™ and LiveSight™ sonar, to exciting navigation functionality like C-MAP® Genesis Live mapping – all designed to help you find more fish.
Fishfinders allow anglers to see a graphic representation of what is beneath their boats so they can identify fish. To choose a fishfinder, consider the type of unit—whether it includes GPS and is part of a boatwide network, size of the fishfinder’s footprint, resolution of the display, how much transmitting power you need, and what frequencies will work best in the inland, coastal or deep-water environment where you fish.
Amazing Outdoor Adventures, LLC (Amazingoutdooradventures.com) is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to Amazon.com. All links to various products on Amazon.com should be assumed to be affiliate unless otherwise noted. Also be aware that Amazon and the Amazon logo are trademarks of Amazon.com, Inc. or its affiliates.
The final point to remember when you are looking out for fish arches is that it doesn’t need to be a full arch. Half arches (like the ones shown in the screen shot above) also show that there is fish. In ourtutorial on how sonars work, we explain in detail why sometimes you get a full arch and sometimes you get a half arch. The short answer is that you will get a full arch if a fish swims through the whole of your sonar cone, and a half or partial arch if they only swim through part of it.

Unless you know where fish are lurking, casting out anywhere on the water doesn’t necessarily guarantee a bite. Finding where the hot spots are will help you save time and money while fishing. That’s where fishfinders come in. An essential part of any modern angler’s arsenal, a fishfinder makes catching more fish easier.  Fishfinders help you pinpoint the honey hole using SONAR so you can see where the fish are and at what depth they are hiding. No more wasting time, tackle or line on deserted spots in the water. From standalone units, fishfinder/GPS combos, networked or multi-function displays, West Marine offers a wide array of fishfinders from the top brands on the market today. Keep reading for tips on finding the right system for your boat.
Points are more gradual than drop offs, but spotting them is just as easy (see the screen shot below). Make sure you maintain a steady speed when trolling or reeling so you get an accurate reading on how steep the incline is. You should scan with a narrow sonar beam to get the clearest reading, and to ensure you see any shelfs or humps which wider beam scanning might not pick up (our page onhow sonars workexplains why this is).
Referred to as a fishfinder, graph, sounder or recreational sonar, these products provide anglers with the ability to locate and target open-water baitfish, game fish and cover. This underwater-viewing advantage helped launch sportfishing markets like never before, as anglers were able to better understand depth contours, bottom composition and structure location, plus how fish related to this environment.
You want to turn the fish finder on. It will be set in automatic mode already, with the pre-program settings already on. You can switch it to a manual mode at any time to customized the finder. When you first turn it on, you can leave it in the automatic mode. You then want to drive on the water in automatic mode to get an idea of what it’s seeing.
As with many products, you’ll have to pay close attention to the specific features delivered for the price, simply because the investment for combination fishfinder and GPS can range from $500 to $1200 or more. Fishfinders and GPS units are well advanced when compared to equipment used just a few years ago. Most of the time you can get excellent 3D mapping, scanning, charting and navigation at a very reasonable price. It’s not necessary to spend hundreds more unless you really want to go after the top-of-the-line unit.

Fully Networkable, 8” Touchscreen Chartplotter and Sonar. Garmin’s GPSMAP 7608xsv includes built in maps for Coastal and Lake mapping, a 10HZ GPS Receiver providing fast acquisition and position tracking. High Performance HD-ID Sonar, 1kW CHIRP, CHIRP DownVu and CHIRP SideVu. Now enjoy FLIR Camera Compatibility, Smart Boundaries and More. Transducer Required and Sold Separately.


Lowrance hds 7 gen 2 touch. Took it off my boat when I got low balled on price of boat.... I think it has less the an hour on it... I honestly dont remember using it at all. Regardless, it has very very low hours if it was used at all. No ducer, wire or mounts come with this. Buyer of my boat literally handed me cash that was 500.00 short so I took it, unplugged this and walked away. Perfect for someone that already has lowrance set up on boat. Selling with no reserve. So good luck.

The side scan will scan much more around the boat but are not as effective, especially in deep water. For this reason alone, you may feel the need to buy two seperate fish finders but some premium models have both side and down scanning capabilities. This means you can usually view both at the same time for a very detailed scan around the boat in all directions.


Unless you know where fish are lurking, casting out anywhere on the water doesn’t necessarily guarantee a bite. Finding where the hot spots are will help you save time and money while fishing. That’s where fishfinders come in. An essential part of any modern angler’s arsenal, a fishfinder makes catching more fish easier.  Fishfinders help you pinpoint the honey hole using SONAR so you can see where the fish are and at what depth they are hiding. No more wasting time, tackle or line on deserted spots in the water. From standalone units, fishfinder/GPS combos, networked or multi-function displays, West Marine offers a wide array of fishfinders from the top brands on the market today. Keep reading for tips on finding the right system for your boat.
When checking the transducer, the most important feature is the cone angle. For a bigger perspective of the verges underneath, choose a bigger degree on the cone. The wider beam gives more coverage of the under water and allows locating more fish within it. However, its drawback is the quick loss of strength. Due to this, it cannot penetrate the water as deep as the narrow cone. The narrow one can go really deep even in shallow waters and can also give information on the composition of the bottom.
Commercial fishermen also make use of these characteristics. They conduct a search by low frequency (i.e., 15 kHz) beams first to grasp the general locations of fish schools around the boat. Subsequently, they narrow the search area for a fish school, using high frequency beams (200 kHz), to detect the exact location of the fish school and operate the boat to be directly above the targeted fish school.
Transducers: Fishfinders operate using a single frequency transducer, dual frequencies, multiple frequencies or a broadband CHIRP system. In general, higher frequencies give the finest detail resolution, the least background noise on your screen and the best view from a fast-moving boat, but don’t penetrate as deeply as lower frequencies. Shallow-water inland anglers generally choose higher frequencies of 200kHz, 455kHz or 800kHz. For maximum depth, use lower frequencies. We recommend 200kHz or higher (up to 800kHz) for water depths up to 200' and 80kHz or 50kHz for deeper waters.
Patrick Morrow is a true fisherman, starting at 4 years old, fishing for bream in his small home lake.This initial childhood fun turned into an almost full-time hobby, often traveling the country to find out new exciting waters to fish in.Favorite species to catch are pike and king salmon. When he is not fishing Patrick is a freelance writer and editor for outdoor blogs.
While many fish finders point directly underneath your boat, higher end units like this one will sweep to the sides as well. Considering that you are casting out from the ship rather than dangling lines beneath it, side sweeping is much more valuable as it allows you to find fish wherever you are, rather than finding them, moving the boat, and then trying to catch them.

The swivel sinker is similar to the plain one, except that instead of loops, there are swivels on each end to attach the line. This is a decided improvement, as it prevents the line from twisting and tangling. In trolling, swivel sinkers are indispensable. The slide sinker, for bottom fishing, is a leaden tube which allows the line to slip through it, when the fish bites. This is an excellent arrangement, as the angler can feel the smallest bite, whereas in the other case the fish must first move the sinker before the angler feels him.
×