The CHIRP sonar that is built into this model is second to none in terms of performance, and always gives you a clear picture and measurement of the floor and surface beneath your boat, as well as the location of the fish around it. Another feature that we really enjoy about this Humingbird fish finder is that it comes with a built in SD card slot so that you can save your favorite waypoints to it. You can even upload additional maps to your software using the SD card feature.


The 256 color TFT screen gives a clear image that can give you readings of depths of up to 240 ft. The charge of the unit can last up to 30 hours. It features SideFinding sonar that gives accurate readings. Its benefit is that you can point it in any direction and get full coverage of the area to find more fish. The temperature feature is included.
Lowrance hds 7 gen 2 touch. Took it off my boat when I got low balled on price of boat.... I think it has less the an hour on it... I honestly dont remember using it at all. Regardless, it has very very low hours if it was used at all. No ducer, wire or mounts come with this. Buyer of my boat literally handed me cash that was 500.00 short so I took it, unplugged this and walked away. Perfect for someone that already has lowrance set up on boat. Selling with no reserve. So good luck.
Detection range (depth) of a fish finder depends upon the frequency used for ultrasound transmission. In principle, the higher the frequency of ultrasound, the shorter the propagation range can be. The wavelength of high frequency ultrasound is short, and its directivity angle is narrow, which enables detailed searches, but it attenuates significantly while travelling through water. Low frequency ultrasound is characterised by its long wavelength, wider directivity angle and high level of tolerance toward underwater attenuation, hence enabling wide-area-searches in deeper water. To summarize, you can choose low frequency if you are searching in deep water and high frequency if you are conducting a detailed search in shallow water. Further, when using low frequency ultrasound, you may be able to conduct more precise deep-water searches by adding an optional Power Adapter, which amplifies the transmitter power to a few kilowatts. Please note, however, that when using the Power Adapter, a dedicated transducer capable of handling higher transmitter power will be needed.

The use of the hook in angling is descended, historically, from what would today be called a "gorge". The word "gorge", in this context, comes from an archaic word meaning "throat". Gorges were used by ancient peoples to capture fish. A gorge was a long, thin piece of bone or stone attached by its midpoint to a thin line. The gorge would be fixed with a bait so that it would rest parallel to the lay of the line. When a fish swallowed the bait, a tug on the line caused the gorge to orient itself at right angles to the line, thereby sticking in the fish's gullet.
Although this unit lacks some of the features found in similar units from different manufacturers, it counterbalances with powerful sonar, using CHIRP for both down view and classic imaging. Additionally, it also comes with Wi-Fi connectivity, and you can benefit from a larger view if linked to a bigger tablet. It's a unit with a tremendous quality and price ratio, with a rating of four and five stars.

The image above, at right, clearly shows the bottom structure—plants, sediments and hard bottom are discernible on sonar plots of sufficiently high power and appropriate frequency. Slightly more than halfway up from the bottom to the left of the screen centre and about a third away from the left side, this image is also displaying a fish – a light spot just to the right of a 'glare' splash from the camera's flashbulb. The X-axis of the image represents time, oldest (and behind the soundhead) to the left, most recent bottom (and current location) on the right; thus the fish is now well behind the transducer, and the vessel is now passing over a dip in the ocean floor or has just left it behind. The resulting distortion depends on both the speed of the vessel and how often the image is updated by the echo sounder.
Screen Color & Resolution is an essential factor in your selection. Color screens are the new norm on today’s fish finders. A color screen enables you to more easily decipher objects in the water, giving you valuable insight into your game fish. Also consider the amount of pixels on your screen—the more pixels, the greater level of detail you can see. LED backlit screens provide brilliant visual display, particularly for fishing in low-light conditions.
If you click the "add to Cart Button" on our website, information on accessories, shipping prices and more will be provided. Please note that clicking on the "add to cart" button only places the item in your "shopping cart" there is no obligation to buy unless you complete the ordering process. At the GPS Store, Inc. we always strive to provide our customers with great value. We believe that our combination of price, knowledge and customer service is the best that you will find anywhere.
When it comes to fish finders and fishing GPS technology, the HELIX 5 delivers some of the best in functionality and creating a seamless user experience for fishing pros and hobbyists. This unit uses precise broadband CHIRP, a Reflex interface, imaging sonar and the power to chart and create maps using Auto Chart Live. The HELIX 5 has taken what is already a premier fish finder tool, and taken it to new heights in terms of features and creating an even better user interface. The display looks rich and clear, and is powered with 4,000 watts of PTP power output.
Networked system: Fully networked systems are available from all the major suppliers, and usually will support a huge range of data sources including radar, raster and vector GPS charts, video, and SiriusXM satellite radio. Many allow Bluetooth/WiFi, and you can control them from your iPhone or Android smartphone. Your fishfinder, often an external “black box” module, is just one of these sources of data. Multiple-display network systems are great for medium-sized or large vessels. Capabilities get more amazing every year.

The size of the area you’re scanning will be affected by the angle of the cone. A wide beam cone scans between 40°-60°, meaning you’ll be covering a large area. A narrow cone will scan between 10°-20°. So make sure you’re aware of whether your fish finder is using a wide or narrow cone when you’re looking at the data on your screen. The Deeper PRO and PRO+ have wide and narrow beam scanning (55° and 15°), the Deeper START has a medium/wide beam (40°). One other point to remember about how you sonar works is that it is constantly sending and receiving data, which means your display will be continually scrolling. The current scanning data will be on the right – the further left on the screen, the older the data.


Pinpoint your favorite waypoints and track fish with a fishfinder from Academy Sports + Outdoors. With a detailed black-and white LCD display, you can clearly spot fish as deep as 1,000' as well as track their location with depth finder technology. Water temperature sensors allow you to monitor the biological patterns of prospective catches, letting you pinpoint where they'll be at any time of day. With a waterproof casing, our selection of fishfinders are designed for use on boats or kayaks. Our giant boating and marine shop has an assortment of marine electronics from popular brands, like Humminbird, Garmin marine and Lowrance, can help you reel in the largest catch. Receive notifications for certain depths and types of fish, as well as sonar and mapping software, so you can find exactly what you're looking for.
Raymarine has a few units that come with a built in GPS. The Dragonfly 4Pro, Dragonfly 5Pro, and Dragonfly 7Pro all have built in GPS. Pay close attention to the unit you are buying, because if you are looking for built in GPS the standard Dragonfly 4 and Dragonfly 5DVS do not have that feature built in. You absolutely have to go Pro to make sure you get the GPS you’re looking for.

The CHIRP sonar that is built into this model is second to none in terms of performance, and always gives you a clear picture and measurement of the floor and surface beneath your boat, as well as the location of the fish around it. Another feature that we really enjoy about this Humingbird fish finder is that it comes with a built in SD card slot so that you can save your favorite waypoints to it. You can even upload additional maps to your software using the SD card feature.
For ice fishing enthusiasts one of the recommended and top rated fish finders is the Humminbird ICE-35 model. One of the most liked features on this device is the zoom flexibility. It allows you to zoom in not just to the bottom, but also zooming in for more details in any part you choose of the water column. The three color fiber optic display gives you a clear view of the readings. The extreme temperature LCD technology reports the lake bottom and automatically sets the flasher. Other features include dual frequency, maximum 200 depth capability and 800 watts peak-to-peak.
THE LIMBO: How low can you go? Or, how low do you need to go? This is an important question you need to answer. If you don't need to see what's 1000 feet below you, they you can certainly save yourself some money. You did save the gift receipts for those much_appreciated_but_unwanted Christmas gifts, didn't you? Before we take the drill off the charger, let's ponder some options and then work backwards to determine what your needs/wants/limitations are.
A GPS is a must have for many fishers and having it in one unit with a fish detector is economical, space saving and convenient. Having the addition of a GPS gives you many benefits. It will give you the ability to mark hot fishing spots and easily return to them in the future, as you can mark the spot on the GPS and then track your way back to it later. These spots are called waypoints and on most units you will be able to mark hundreds or even thousands of them.
Ice fishing is work. Just to get a line wet, you’ve got to drill and scoop. Just to keep a line wet, you’ve got to clear ice from the guides. There are a ton of little things that can make a hard-water outing much more challenging than fishing on a sunny summer afternoon, so it should be no surprise that smart ice anglers have come up with a pile of gear hacks to make any day on a frozen lake a little easier, more comfortable, and a lot fishier. You could fill a book with these tricks, but here are four that every serious ice fisherman should know. They all require a few inexpensive items you probably have lying around at home.

Eventually, CRTs were married with a fathometer for commercial fishing and the fishfinder was born. With the advent of large LCD arrays, the high power requirements of a CRT gave way to the LCD in the early 1990s and fishfinding fathometers reached the sporting markets. Nowadays, many fishfinders available for hobby fishers have color LCD screens, built-in GPS, charting capabilities, and come bundled with transducers.[5] Today, sporting fishfinders lack only the permanent record of the big ship navigational fathometer, and that is available in high end units that can use the ubiquitous computer to store that record as well.
LCD displays are made of a grid of “picture elements,” tiny dots that individually darken when electrical current is applied, with their name shortened in common usage to “pixel.” More vertical pixels mean higher depth resolution, as each pixel represents less depth. The number of pixels in a screen’s horizontal axis determines how long objects stay onscreen before they scroll out of view, of significant importance with split-screen displays showing narrow columns of side-by-side information.
The thickness of the line representing the bottom is also a great clue to bottom hardness. Here the rule is simple – the thicker the line, the harder the bottom. But, be careful – sonar sensitivity can affect how thick the line is. The Deeper display has adjustable sensitivity. So if you turn up the sensitivity to 100%, the bottom line may appear thicker, if you turn it down to 10% it may appear thinner. So practice adjusting the sensitivity and get used to judging how much the bottom thickness varies based on this.
Best of all though, the Helix 7 is a complete package, and includes underwater sonar transducer and all necessary mounting hardware for quick and easy installation on your boat. All you need to do is power up the device, toss the transducer in the water, and wait for sonar returns to start rolling in. Make every fishing expedition a trophy winner with the Humminbird Helix 7 CHIRP DI GPS G2 Fishfinder.
Humminbird 140C Fishin’ Buddy is one of the top rated fish finders among the portable type. So you can use it on your boat, on the leased boat, on the dock or for fishing from anywhere else. To use the device you won’t need to do any rigging or wiring. Instead it uses extendable transducer tube housing with the length suitable for most small and mid-sized boats.
Harpoons are spears which have a barb at the end. Their use was widespread in palaeolithic times.[11] Cosquer cave in Southern France contains cave art over 16,000 years old, including drawings of seals which appear to have been harpooned. Tridents are spears which have three prongs at the business end. They are also called leisters or gigs. They feature widely in early mythology and history.
×