These are very valuable features to target for a range of species, and the good news is, they are easy to spot with a fish finder. As you troll or reel in your device, you will see the depth contour change – don’t forget to use the depth reader on your display (on the Deeper App it’s in the top right corner of the screen) so you can track how quickly the depth is rising or falling.

While many fish finders point directly underneath your boat, higher end units like this one will sweep to the sides as well. Considering that you are casting out from the ship rather than dangling lines beneath it, side sweeping is much more valuable as it allows you to find fish wherever you are, rather than finding them, moving the boat, and then trying to catch them.


Power output is measure in watts, often represented by the “W” symbol. With more power you’ll get clearer, more-accurate readings, and you’ll be able to find fish in deeper water. Units with limited power won’t always send the signal out far enough and you can get poor quality images. Look closely for a good power output and frequency options. The right combination can help you choose the right unit, based on overall ability. You’re looking for balance of depth, power and clarity of image.
Just getting started using a fish finder? Know the basics but want to get more out of your fish finder? Not sure you’re reading your fish finder display correctly? Don’t worry, we’re here to help. This short tutorial will teach you how to make sense of your fish finder display so you can tell what’s a bait fish, what’s a trophy catch and what’s just a submerged tree that you’ll snag on. Take just 7 minutes to go through this tutorial and at the end you’ll be able to read your fish finder display for:
Few things aggravate ice anglers more than frozen rod guides. Chipping away with fingernails, teeth, or anything else lying around can easily damage both the frame and rings of the guides, but you have to keep them clear because iced guides will weaken line, especially super-­light monofilament or fluorocarbon. There are a number of homebrew remedies for tackling this problem, but none are more effective than lip balm, which creates a film on guides that inhibits them from freezing and building ice. It’s waterproof and takes quite a while for wet line or precipitation to break it down and necessitate reapplication. A small stick or tin stores easily in your pocket, and just a few swipes with your finger on guide rings will protect them from ice-up for several hours.
A fish hook is a device for catching fish either by impaling them in the mouth or, more rarely, by snagging the body of the fish. Fish hooks have been employed for millennia by anglers to catch fresh and saltwater fish. Early hooks were made from the upper bills of eagles and from bones, shells, horns and thorns of plants (Parker 2002). In 2005, the fish hook was chosen by Forbes as one of the top twenty tools in the history of man.[2] Fish hooks are normally attached to some form of line or lure device which connects the caught fish to the angler. There is an enormous variety of fish hooks. Sizes, designs, shapes, and materials are all variable depending on the intended purpose of the hook. They are manufactured for a range of purposes from general fishing to extremely limited and specialized applications. Fish hooks are designed to hold various types of artificial, processed, dead or live baits (bait fishing); to act as the foundation for artificial representations of fish prey (fly fishing); or to be attached to or integrated into other devices that represent fish prey (lure fishing).
The side scan will scan much more around the boat but are not as effective, especially in deep water. For this reason alone, you may feel the need to buy two seperate fish finders but some premium models have both side and down scanning capabilities. This means you can usually view both at the same time for a very detailed scan around the boat in all directions.
ONE SMALL STEP FOR MAN, ONE GIANT LEAP FOR PADDLING_KIND: In the 2009 ICAST article, I mentioned a combo system that was in the new products exhibit, but wasn't available at the time of the show. It's most certainly available now, and that unit is the Humminbird 385CI. Like us, fish seek comfort, safety, and food. This unit will allow you to gather "data" that you can process in to fish finding "information".

Transmit Power: Transmit power is expressed in watts RMS (root mean squared) and is related to how well you see in silt-laden water, view down to greater depths and successfully resolve separate targets and bottom structure. A 500-watt (RMS) fishfinder should have plenty of power for most coastal applications. Serious bluewater anglers should look for 1,000 watts or more. Inland lake fishermen can see the shallow bottom with only 200 watts.
Fish icons are a useful tool when you are getting started with a sonar device: your fish finder interprets the sonar data it receives and tries to work out if it is a fish or not. It does this based on factors like the size of the object and the strength of the sonar return. In the case of Deeper sonars, we use an advanced algorithm in the Deeper App to interpret the data. Unfortunately, even the most advanced units aren’t 100% accurate in interpreting correctly.

Choosing the perfect fish finder for your requirement is hard with many features such as imaging, power and more. The main purpose of a fish finder is to catch more fish with the screen displaying the fish and underwater structure and physical objects. Other information such as water temperature and depth are common on the majority of devices with many high end fish finders providing much more.


CHIRP devices can transmit simultaneously on high and low frequencies. The lower frequency gives greater depth penetration, and it requires less power than a higher frequency signal so it generates less noise. The result is a “whisper into the water” that locates the fish without disturbing them. The higher frequency signal gives even finer detail at shallow to mid-water depths.
If I'm scouting a new area I won't know anything about what sort of structure is ahead until I paddle over it, blowing out any fish that may have been there. With this little guy, I could cast it to the spot, get a read on what's below and proceed. And, you have the luxury of retrieving it slowly to see bottom contours between you and that fishy spot. There have been a number of occasions when I've made numerous casts at a fishy looking location (without any luck), only to paddle over there and discover that it was 10" deep, nobody home.

The Garmin Echo 551DV is one of the newer and more advanced models in the Garmin line of fish finders and it’s the top fish finder under 300. It’s one of my top choices and I really think that it’s the best fish finder for the money. It offers the best fishing sonar and a large clear display. The transducer has 500 watts of power, which allows the wave to go as deep as 2300 feet. It comes from the echo fish finder series that are known for their great accuracy.

If you’ve never used sonar before, you want to keep the auto depth turned on. It automatically tracks the floor of the water, making it easier to see how far down it is. When you become more experienced, you can adjust the setting. The auto depth feature can be adjusted to hide the first few feet underneath, and above the true bottom. It’s useful for setting your sights on the fish you want to catch.
While not every object will be as easy to distinguish, you can always get clues from the shape and also the strength of the sonar return. Notice the multiple orange sonar returns underneath the car – these tell you that this is a very hard object. The sonar scans have hit the car, bounced up to the surface of the water, bounced off the surface and hit the car again.
Ice fishing is work. Just to get a line wet, you’ve got to drill and scoop. Just to keep a line wet, you’ve got to clear ice from the guides. There are a ton of little things that can make a hard-water outing much more challenging than fishing on a sunny summer afternoon, so it should be no surprise that smart ice anglers have come up with a pile of gear hacks to make any day on a frozen lake a little easier, more comfortable, and a lot fishier. You could fill a book with these tricks, but here are four that every serious ice fisherman should know. They all require a few inexpensive items you probably have lying around at home.
Portable fish finders are the better choice for those who lease their boat. Also if you ice fish or “fly-in” fish, a portable unit would be more suitable for you. They usually come with their own carrying case and battery power supply. Most of the fish locators come with the transom mount for installation. The portable units come with the transducer already attached to the transom with the use of a suction cup.
If you’ve used a fish finder before, then you might be wondering why it’s necessary to get one with a GPS. To be perfectly honest, if you are someone who likes to fish in your local area and either casts from the shore or the back of a small boat, then GPS capability may not be something that’s worthwhile. However, for any fisherman who likes to go searching for the best catch, having GPS installed on your finder can make a world of difference. Here are some of the best reasons to get the  best GPS combo fish locator.
Simrad’s GO9 XSE Combination GPS/ Fishfinder offers a networkable 9” Touchscreen unit at an affordable price point. An Internal 10Hz GPS Receiver quickly and accurately locates position on the included C-Map Pro Charting while the included TotalScan Transom Mount Transducer provides detailed underwater images. Compatible with detailed mapping from C-MAP MAX-N, Navionics, Insight, Insight Genesis, and NV Digital Charts.
BABY STEPS: You don't have to spend a ton of money or be an engineer to get your kayak electrified. Here we have the Lowrance X50DS. The fishfinder and the installation kit will run around $250. Look at what you spend for a rod/reel/braided line, and you'll find this kit is certainly affordable. The display is 4-level grayscale, and the battery pack contains AA batteries. However, what it may lack in fashion it makes up by function. The battery pack goes in a dry bag, and the unit itself is easily removed at the end of the day. It features a built in temperature sensor and 120 degrees of wide angle coverage.
Check out our Factory Outlet Store where you can find all of our recertified marine electronics. Items and quantities are limited, so do not hesitate if you find and item you are looking for. Recertified products are restored to like new condition and carry a 90 day warranty, so you know you are getting one heck of a deal. If you have any questions you can always contact our support team via our support ticket system at support.norcrossmarine.com. We are always happy to troubleshoot and answer any questions you may have.

Patrick Morrow is a true fisherman, starting at 4 years old, fishing for bream in his small home lake.This initial childhood fun turned into an almost full-time hobby, often traveling the country to find out new exciting waters to fish in.Favorite species to catch are pike and king salmon. When he is not fishing Patrick is a freelance writer and editor for outdoor blogs.
Shipping is always free for parts and accessories for all our Marine Electronics. We have just about any replacement part that you would need to repair your HawkEye product, and a vast amount of marine accessories to customize your boating and fishing experience. Whether you are looking into our cable float kit or replacement lens for your hand held depth sounder, we have it all.
Fish finders are incredibly valuable tools, and the more you learn about how to read them, the more successful your fishing trips will be. A key part of learning as angler is to go from trial and error to a more knowledge-based approach. Maybe you regularly catch at a certain spot with a certain presentation – but do you know why? A fish finder will help you understand not just your failures, but also your successes. And once you know this, you can recreate this success more easily.
When it comes to fish finders and fishing GPS technology, the HELIX 5 delivers some of the best in functionality and creating a seamless user experience for fishing pros and hobbyists. This unit uses precise broadband CHIRP, a Reflex interface, imaging sonar and the power to chart and create maps using Auto Chart Live. The HELIX 5 has taken what is already a premier fish finder tool, and taken it to new heights in terms of features and creating an even better user interface. The display looks rich and clear, and is powered with 4,000 watts of PTP power output.
2. Save numerous locations and data for accurate and successful fishing next time out – You navigate quickly and accurately to your top fishing spot, then save the locations so you can return to them later. Reduction in physical size has been accompanied by massive increases in computer memory, so you can have the information on numerous locations ready to use every time you go, no matter where you go.
Best of all though, the Helix 7 is a complete package, and includes underwater sonar transducer and all necessary mounting hardware for quick and easy installation on your boat. All you need to do is power up the device, toss the transducer in the water, and wait for sonar returns to start rolling in. Make every fishing expedition a trophy winner with the Humminbird Helix 7 CHIRP DI GPS G2 Fishfinder.
The CHIRP sonar that is built into this model is second to none in terms of performance, and always gives you a clear picture and measurement of the floor and surface beneath your boat, as well as the location of the fish around it. Another feature that we really enjoy about this Humingbird fish finder is that it comes with a built in SD card slot so that you can save your favorite waypoints to it. You can even upload additional maps to your software using the SD card feature.
Shipping is always free for parts and accessories for all our Marine Electronics. We have just about any replacement part that you would need to repair your HawkEye product, and a vast amount of marine accessories to customize your boating and fishing experience. Whether you are looking into our cable float kit or replacement lens for your hand held depth sounder, we have it all.
Portable fish finders are the better choice for those who lease their boat. Also if you ice fish or “fly-in” fish, a portable unit would be more suitable for you. They usually come with their own carrying case and battery power supply. Most of the fish locators come with the transom mount for installation. The portable units come with the transducer already attached to the transom with the use of a suction cup.
A fishing rod is an additional tool used with the hook, line and sinker. A length of fishing line is attached to a long, flexible rod or pole: one end terminates with the hook for catching the fish. Early fishing rods are depicted on inscriptions in ancient Egypt, China, Greece and Rome. In Medieval England they were called angles (hence the term angling). As they evolved they were made from materials such as split Tonkin bamboo, Calcutta reed, or ash wood, which were light, tough, and pliable. The butts were frequently made of maple. Handles and grips were made of cork, wood, or wrapped cane. Guides were simple wire loops.
×