The intensity of the sonar return from a hard bottom will be different to one from a hard bottom. Your fish finder uses colour to show this difference. In the standard colour palette of the Deeper display, the colour varies from dull brown (softest) to intense orange (hardest). In the day mode colour palette (see screen shot), the difference is even easier to see, with the colour ranging from purple (softest) to red to orange to yellow (hardest).


You want to turn the fish finder on. It will be set in automatic mode already, with the pre-program settings already on. You can switch it to a manual mode at any time to customized the finder. When you first turn it on, you can leave it in the automatic mode. You then want to drive on the water in automatic mode to get an idea of what it’s seeing.
THE LIMBO: How low can you go? Or, how low do you need to go? This is an important question you need to answer. If you don't need to see what's 1000 feet below you, they you can certainly save yourself some money. You did save the gift receipts for those much_appreciated_but_unwanted Christmas gifts, didn't you? Before we take the drill off the charger, let's ponder some options and then work backwards to determine what your needs/wants/limitations are.

Just getting started using a fish finder? Know the basics but want to get more out of your fish finder? Not sure you’re reading your fish finder display correctly? Don’t worry, we’re here to help. This short tutorial will teach you how to make sense of your fish finder display so you can tell what’s a bait fish, what’s a trophy catch and what’s just a submerged tree that you’ll snag on. Take just 7 minutes to go through this tutorial and at the end you’ll be able to read your fish finder display for:
The 256 color TFT screen gives a clear image that can give you readings of depths of up to 240 ft. The charge of the unit can last up to 30 hours. It features SideFinding sonar that gives accurate readings. Its benefit is that you can point it in any direction and get full coverage of the area to find more fish. The temperature feature is included.
Check out our Factory Outlet Store where you can find all of our recertified marine electronics. Items and quantities are limited, so do not hesitate if you find and item you are looking for. Recertified products are restored to like new condition and carry a 90 day warranty, so you know you are getting one heck of a deal. If you have any questions you can always contact our support team via our support ticket system at support.norcrossmarine.com. We are always happy to troubleshoot and answer any questions you may have.
While not every object will be as easy to distinguish, you can always get clues from the shape and also the strength of the sonar return. Notice the multiple orange sonar returns underneath the car – these tell you that this is a very hard object. The sonar scans have hit the car, bounced up to the surface of the water, bounced off the surface and hit the car again.
The Garmin Echo 551DV is one of the newer and more advanced models in the Garmin line of fish finders and it’s the top fish finder under 300. It’s one of my top choices and I really think that it’s the best fish finder for the money. It offers the best fishing sonar and a large clear display. The transducer has 500 watts of power, which allows the wave to go as deep as 2300 feet. It comes from the echo fish finder series that are known for their great accuracy.

It’s no secret that HDS displays are used by more tournament fishing pros than all other fishfinding brands combined, so we didn’t have to go back to the drawing board to build it; we just made the best fishfinder/chartplotter in the world even better. HDS LIVE  delivers premium performance and support for the best collection of innovative sonar features available – from Active Imaging™, StructureScan® 3D, FishReveal™ and LiveSight™ sonar, to exciting navigation functionality like C-MAP® Genesis Live mapping – all designed to help you find more fish.
PERMANENT INSTALLATION: I say an installation is permanent once you start drilling holes. A permanent installation will require you to provide power/wiring, physically mount the transducer, and mount the fish finder itself. A few years ago, these things were a lot tougher to do - similar to baking a cake from scratch. I don't like the notion of "trial and error" when I have a drill in my hand. But now that our sport has become more mainstream, products are being offered specifically for kayaks, and fish finder installation can be so easy, even Betty Crocker could do it.
Fishing traps are culturally almost universal and seem to have been independently invented many times. There are essentially two types of trap, a permanent or semi-permanent structure placed in a river or tidal area and pot-traps that are baited to attract prey and periodically lifted. They might have the form of a fishing weir or a lobster trap. A typical trap can have a frame of thick steel wire in the shape of a heart, with chicken wire stretched around it. The mesh wraps around the frame and then tapers into the inside of the trap. When a fish swims inside through this opening, it cannot get out, as the chicken wire opening bends back into its original narrowness. In earlier times, traps were constructed of wood and fibre.

BUT DOES A FISHFINDER REALLY FIND FISH? Does a woodchuck really chuck wood? Sorry jackwagon, I had to go there. A fishfinder works on the same theory as deep space telescopes identifying distant stars. It doesn't see "fish" but it does see things that don't look like water. Once the data is processed, the resulting image is therefore labeled fish. Therefore, these units absolutely process the data and tell you if fish are in the beam. But alas, they don't know what they're eating, or if they're even in the mood to eat. But, I do believe that fish will almost always eat if given the right offering. But, you have to find them first.
BABY STEPS: You don't have to spend a ton of money or be an engineer to get your kayak electrified. Here we have the Lowrance X50DS. The fishfinder and the installation kit will run around $250. Look at what you spend for a rod/reel/braided line, and you'll find this kit is certainly affordable. The display is 4-level grayscale, and the battery pack contains AA batteries. However, what it may lack in fashion it makes up by function. The battery pack goes in a dry bag, and the unit itself is easily removed at the end of the day. It features a built in temperature sensor and 120 degrees of wide angle coverage.
Hello there! My name is Rick and you’ve probably come across my website because you’re in search of a product that will make your fishing experience easier and more effective. Or maybe you are just looking for information to get a better understanding of fish finders. In any case, you’ve come to the right place. I’m not a professional in this industry, I’m just a fishing enthusiast and during my search for the best fish finder on the market I’ve learned quite a few things about them. To give you the benefit of all the research I’ve done, I’ve created this website.
The depth scale on the right of the screen enables you to identify the depth of any features you find. The depth reading in the top right of the screen shows you the bottom depth under your fish finder right now – bear in mind this is not necessarily the same depth as the features you have just scanned, especially if you are scanning drop offs or points.
A sinker or plummet is a weight used when angling to force the lure or bait to sink more rapidly or to increase the distance that it may be cast. The ordinary plain sinker is traditionally made of lead. It can be practically any shape, and is often shaped round like a pipe-stem, with a swelling in the middle. However, the use of smaller lead based fishing sinkers has now been banned in the UK, Canada and some states in the USA,[4] since lead can cause toxic lead poisoning if ingested. There are loops of brass wire on either end of the sinker to attach the line. Weights can range from a quarter of an ounce for trout fishing up to a couple of pounds or more for sea bass and menhaden.
×