Humminbird 140C Fishin’ Buddy is one of the top rated fish finders among the portable type. So you can use it on your boat, on the leased boat, on the dock or for fishing from anywhere else. To use the device you won’t need to do any rigging or wiring. Instead it uses extendable transducer tube housing with the length suitable for most small and mid-sized boats.
When choosing the fish finder, you also need to choose the unit with the right frequency, which is also an important feature of the transducer. The frequency is directly related to angle of the cone. On most of the transducers you can find the following frequencies: 50, 83, 192 and 200 kHz. A higher frequency will give you more detail on the screen. You can find models that offer dual, single and multiple frequencies.
A fishing line is a cord used or made for fishing. The earliest fishing lines were made from leaves or plant stalk (Parker 2002). Later lines were constructed from horse hair or silk thread, with catgut leaders. From the 1850s, modern industrial machinery was employed to fashion fishing lines in quantity. Most of these lines were made from linen or silk, and more rarely cotton.[3]
NO INSTALLATION REQUIRED: That got your attention, didn't it? If you're on a budget, and don't want any sort of permanent installation mods to your boat, the Humminbird Smartcast series may be your answer. You simply cast the green transducer to the spot where you want to investigate, and the signal comes back to the wrist module (RF30) or the traditional display model (RF15). This series doesn't have a lot of bells and whistles, but for my kind of fishing/paddlecraft, it may be a great solution.
Shipping is always free for parts and accessories for all our Marine Electronics. We have just about any replacement part that you would need to repair your HawkEye product, and a vast amount of marine accessories to customize your boating and fishing experience. Whether you are looking into our cable float kit or replacement lens for your hand held depth sounder, we have it all.
Fish finders are incredibly valuable tools, and the more you learn about how to read them, the more successful your fishing trips will be. A key part of learning as angler is to go from trial and error to a more knowledge-based approach. Maybe you regularly catch at a certain spot with a certain presentation – but do you know why? A fish finder will help you understand not just your failures, but also your successes. And once you know this, you can recreate this success more easily.

Simrad’s GO9 XSE Combination GPS/ Fishfinder offers a networkable 9” Touchscreen unit at an affordable price point. An Internal 10Hz GPS Receiver quickly and accurately locates position on the included C-Map Pro Charting while the included TotalScan Transom Mount Transducer provides detailed underwater images. Compatible with detailed mapping from C-MAP MAX-N, Navionics, Insight, Insight Genesis, and NV Digital Charts.
Choosing the perfect fish finder for your requirement is hard with many features such as imaging, power and more. The main purpose of a fish finder is to catch more fish with the screen displaying the fish and underwater structure and physical objects. Other information such as water temperature and depth are common on the majority of devices with many high end fish finders providing much more.
Networked system: Fully networked systems are available from all the major suppliers, and usually will support a huge range of data sources including radar, raster and vector GPS charts, video, and SiriusXM satellite radio. Many allow Bluetooth/WiFi, and you can control them from your iPhone or Android smartphone. Your fishfinder, often an external “black box” module, is just one of these sources of data. Multiple-display network systems are great for medium-sized or large vessels. Capabilities get more amazing every year.
Explore our collection of new fly-fishing gear and equipment. We carefully plan our designs and research every detail so you can maximize your fishing time and enjoy the best fishing gear money can buy. Discover the latest in a variety of fishing gear, including fly rods, fishing packs, waders, boats, wading boots, fly reels, and other gear. Let us help prepare you for your next fishing adventure—our selection of fishing gear has been engineered and tested by industry professionals to bring you only the best fishing products; shop with confidence knowing you're choosing from the best fly-fishing gear on the market.

CHIRP fishfinders transmit less peak power than a conventional fishfinder, but their wide-band, frequency modulated pulses (130-210kHz, for example) can be very long in duration and put 10-50 times more energy into the water. Using digital pattern matching and signal processing, CHIRP devices achieve unprecedented resolution and target detection. Your ability to resolve individual fish, or separate fish from bottom structure, is now a matter of inches, instead of several feet with traditional fishfinders. See individual fish in groups, instead of a single mass.
BABY STEPS: You don't have to spend a ton of money or be an engineer to get your kayak electrified. Here we have the Lowrance X50DS. The fishfinder and the installation kit will run around $250. Look at what you spend for a rod/reel/braided line, and you'll find this kit is certainly affordable. The display is 4-level grayscale, and the battery pack contains AA batteries. However, what it may lack in fashion it makes up by function. The battery pack goes in a dry bag, and the unit itself is easily removed at the end of the day. It features a built in temperature sensor and 120 degrees of wide angle coverage.
It’s no secret that HDS displays are used by more tournament fishing pros than all other fishfinding brands combined, so we didn’t have to go back to the drawing board to build it; we just made the best fishfinder/chartplotter in the world even better. HDS LIVE  delivers premium performance and support for the best collection of innovative sonar features available – from Active Imaging™, StructureScan® 3D, FishReveal™ and LiveSight™ sonar, to exciting navigation functionality like C-MAP® Genesis Live mapping – all designed to help you find more fish.

BUT DOES A FISHFINDER REALLY FIND FISH? Does a woodchuck really chuck wood? Sorry jackwagon, I had to go there. A fishfinder works on the same theory as deep space telescopes identifying distant stars. It doesn't see "fish" but it does see things that don't look like water. Once the data is processed, the resulting image is therefore labeled fish. Therefore, these units absolutely process the data and tell you if fish are in the beam. But alas, they don't know what they're eating, or if they're even in the mood to eat. But, I do believe that fish will almost always eat if given the right offering. But, you have to find them first.

Finally, we come to the HDS-7 from Lowrance. I have had limited experience with this company, but from what I know it is a fantastic maker of fish finders, and the HDS-7 is no exception. This particular model has a seven-inch touchscreen, which makes it one of the most high-tech options you can find anywhere. If you like a more ergonomic design and want something that is more user-friendly, the HDS-7 could be for you.
Winter weather may run us inside, but that doesn't mean the sport sleeps. Those "other things" I mentioned will be covered when I write my book, but for now they will have to wait. In the mean time, let's discuss some other "deep thoughts". Or should that be "thoughts about the deep"? Or maybe it would be "I thought this water was deeper". This article is about depth finders, or more commonly called "fish finders". In this issue, we'll discuss your options when it comes to selecting one of these gadgets, along with tips for temporary or permanent installation.

While not every object will be as easy to distinguish, you can always get clues from the shape and also the strength of the sonar return. Notice the multiple orange sonar returns underneath the car – these tell you that this is a very hard object. The sonar scans have hit the car, bounced up to the surface of the water, bounced off the surface and hit the car again.
Fishing traps are culturally almost universal and seem to have been independently invented many times. There are essentially two types of trap, a permanent or semi-permanent structure placed in a river or tidal area and pot-traps that are baited to attract prey and periodically lifted. They might have the form of a fishing weir or a lobster trap. A typical trap can have a frame of thick steel wire in the shape of a heart, with chicken wire stretched around it. The mesh wraps around the frame and then tapers into the inside of the trap. When a fish swims inside through this opening, it cannot get out, as the chicken wire opening bends back into its original narrowness. In earlier times, traps were constructed of wood and fibre.
Portable fish finders are the better choice for those who lease their boat. Also if you ice fish or “fly-in” fish, a portable unit would be more suitable for you. They usually come with their own carrying case and battery power supply. Most of the fish locators come with the transom mount for installation. The portable units come with the transducer already attached to the transom with the use of a suction cup.
The term tackle, with the meaning "apparatus for fishing", has been in use from 1398 AD.[1] Fishing tackle is also called fishing gear. However the term fishing gear is more usually used in the context of commercial fishing, whereas fishing tackle is more often used in the context of recreational fishing. This article covers equipment used by recreational anglers.
×