The depth scale on the right of the screen enables you to identify the depth of any features you find. The depth reading in the top right of the screen shows you the bottom depth under your fish finder right now – bear in mind this is not necessarily the same depth as the features you have just scanned, especially if you are scanning drop offs or points.
CHIRP devices can transmit simultaneously on high and low frequencies. The lower frequency gives greater depth penetration, and it requires less power than a higher frequency signal so it generates less noise. The result is a “whisper into the water” that locates the fish without disturbing them. The higher frequency signal gives even finer detail at shallow to mid-water depths.
The image to the right shows a school of white bass aggressively feeding on a school of threadfin shad. Note the school of baitfish near the bottom. When threatened, baitfish form a tightly packed school, as the individuals seek safety in the center of the school. This typically looks like an irregularly shaped ball or thumbprint on the fishfinder screen. When no predators are nearby, a school of baitfish frequently appears as a thin horizontal line across the screen, at the depth where the temperature and oxygen levels are optimal. The nearly-vertical lines near the right edge of the screen show the path of fishing lures falling to the bottom.
THE LIMBO: How low can you go? Or, how low do you need to go? This is an important question you need to answer. If you don't need to see what's 1000 feet below you, they you can certainly save yourself some money. You did save the gift receipts for those much_appreciated_but_unwanted Christmas gifts, didn't you? Before we take the drill off the charger, let's ponder some options and then work backwards to determine what your needs/wants/limitations are.
Transmit Power: Transmit power is expressed in watts RMS (root mean squared) and is related to how well you see in silt-laden water, view down to greater depths and successfully resolve separate targets and bottom structure. A 500-watt (RMS) fishfinder should have plenty of power for most coastal applications. Serious bluewater anglers should look for 1,000 watts or more. Inland lake fishermen can see the shallow bottom with only 200 watts.
A sinker or plummet is a weight used when angling to force the lure or bait to sink more rapidly or to increase the distance that it may be cast. The ordinary plain sinker is traditionally made of lead. It can be practically any shape, and is often shaped round like a pipe-stem, with a swelling in the middle. However, the use of smaller lead based fishing sinkers has now been banned in the UK, Canada and some states in the USA, since lead can cause toxic lead poisoning if ingested. There are loops of brass wire on either end of the sinker to attach the line. Weights can range from a quarter of an ounce for trout fishing up to a couple of pounds or more for sea bass and menhaden.
2-4 PERSON CAPACITY: Comfortably sized 2-4 people capacity including set-up dimensions of 81" x 71" and 71" high with plenty of room to fish and even stand up inside of.|POP-UP STYLE SETUP: Sets up super quick and tears down just as easily by simply pulling up on the roof and then on all four sides so youÆll be good to go in minutes.|FULLY INSULATED FABRIC: Features 300 denier insulated oxford fabric with frost-resistance up to 22 degrees Fahrenheit to keep you warm no matter the weather.|DURABLY DESIGNED: Includes solid fiberglass poles, diecast hubs, and heavy duty zippers designed for repeated use plus 4 strong ground stakes and 4 pull ropes.|WELL-VENTILATED ACCESS: Two zippered doors on opposite ends and hook and loop fastened windows allow for easy access and provide a well-ventilated.