The size of the area you’re scanning will be affected by the angle of the cone. A wide beam cone scans between 40°-60°, meaning you’ll be covering a large area. A narrow cone will scan between 10°-20°. So make sure you’re aware of whether your fish finder is using a wide or narrow cone when you’re looking at the data on your screen. The Deeper PRO and PRO+ have wide and narrow beam scanning (55° and 15°), the Deeper START has a medium/wide beam (40°). One other point to remember about how you sonar works is that it is constantly sending and receiving data, which means your display will be continually scrolling. The current scanning data will be on the right – the further left on the screen, the older the data.
Now let’s imagine another scenario – again your sonar is stationary, but this time 2 fish swim through your sonar beam, one big and one small. The big fish swims very quickly through the sonar beam, the small one swims slowly. Which one will make the longer fish arch on your screen? The answer is the small one. That’s because a slow moving object will leave a longer mark than a fast moving one, whatever their size.

You want to turn the fish finder on. It will be set in automatic mode already, with the pre-program settings already on. You can switch it to a manual mode at any time to customized the finder. When you first turn it on, you can leave it in the automatic mode. You then want to drive on the water in automatic mode to get an idea of what it’s seeing.
These are very valuable features to target for a range of species, and the good news is, they are easy to spot with a fish finder. As you troll or reel in your device, you will see the depth contour change – don’t forget to use the depth reader on your display (on the Deeper App it’s in the top right corner of the screen) so you can track how quickly the depth is rising or falling.
Just plug it in and fish. Yes, it's that easy. Transducer Type: TripleShot. Fishing -Tackle Box/ Accessory. 2 Autotuning sonar. It doesn't get any easier. The world’s easiest fishfinder, HOOK. Easy front-dash or quick-release bracket mounting installation - Pick the best installation option for your boat from simple flush-mount and quick-release-bracket installation options.
2. Save numerous locations and data for accurate and successful fishing next time out – You navigate quickly and accurately to your top fishing spot, then save the locations so you can return to them later. Reduction in physical size has been accompanied by massive increases in computer memory, so you can have the information on numerous locations ready to use every time you go, no matter where you go.
BUT DOES A FISHFINDER REALLY FIND FISH? Does a woodchuck really chuck wood? Sorry jackwagon, I had to go there. A fishfinder works on the same theory as deep space telescopes identifying distant stars. It doesn't see "fish" but it does see things that don't look like water. Once the data is processed, the resulting image is therefore labeled fish. Therefore, these units absolutely process the data and tell you if fish are in the beam. But alas, they don't know what they're eating, or if they're even in the mood to eat. But, I do believe that fish will almost always eat if given the right offering. But, you have to find them first.

The use of the hook in angling is descended, historically, from what would today be called a "gorge". The word "gorge", in this context, comes from an archaic word meaning "throat". Gorges were used by ancient peoples to capture fish. A gorge was a long, thin piece of bone or stone attached by its midpoint to a thin line. The gorge would be fixed with a bait so that it would rest parallel to the lay of the line. When a fish swallowed the bait, a tug on the line caused the gorge to orient itself at right angles to the line, thereby sticking in the fish's gullet.
The 256 color TFT screen gives a clear image that can give you readings of depths of up to 240 ft. The charge of the unit can last up to 30 hours. It features SideFinding sonar that gives accurate readings. Its benefit is that you can point it in any direction and get full coverage of the area to find more fish. The temperature feature is included.
Fish will show up on your screen as an arch (the reason why they are shown as an arch is explained in detail here). But it’s important to remember these arches can vary in size (length and width), and might not be a full arch – look out for those half arches too. The screenshot below gives some nice examples of different arches. They vary in length and width, and some are not full arches, but these are all fish.
Transducers: Fishfinders operate using a single frequency transducer, dual frequencies, multiple frequencies or a broadband CHIRP system. In general, higher frequencies give the finest detail resolution, the least background noise on your screen and the best view from a fast-moving boat, but don’t penetrate as deeply as lower frequencies. Shallow-water inland anglers generally choose higher frequencies of 200kHz, 455kHz or 800kHz. For maximum depth, use lower frequencies. We recommend 200kHz or higher (up to 800kHz) for water depths up to 200' and 80kHz or 50kHz for deeper waters.
As we mentioned, the strength of a fish finder is in how well it can locate the fish, which is why you need a high-quality transducer. CHIRP technology is one of the best you can find, and it provides a 200-watt RMS signal that can reach down to 1,600 feet in fresh water and 750 feet in salt water. Overall, you can find plenty of fish with this device.
A sinker or plummet is a weight used when angling to force the lure or bait to sink more rapidly or to increase the distance that it may be cast. The ordinary plain sinker is traditionally made of lead. It can be practically any shape, and is often shaped round like a pipe-stem, with a swelling in the middle. However, the use of smaller lead based fishing sinkers has now been banned in the UK, Canada and some states in the USA,[4] since lead can cause toxic lead poisoning if ingested. There are loops of brass wire on either end of the sinker to attach the line. Weights can range from a quarter of an ounce for trout fishing up to a couple of pounds or more for sea bass and menhaden.
Look for equipment that will work with multiple frequency: higher for better detail but not as successful in deep water; lower for depth but less detail on your viewing screen. Of course, if you fish only in shallow water, you’ll be happier with high-frequency output. For deep-water work and for commercial fishing, you may want to use a lower frequency.
A fishfinder or sounder (Australia) is an instrument used to locate fish underwater by detecting reflected pulses of sound energy, as in sonar. A modern fishfinder displays measurements of reflected sound on a graphical display, allowing an operator to interpret information to locate schools of fish, underwater debris, and the bottom of body of water. Fishfinder instruments are used both by sport and commercial fishermen. Modern electronics allows a high degree of integration between the fishfinder system, marine radar, compass and GPS navigation systems.
It is without a doubt that Lowrance has once again raised the bar for current technology. With their newly refined interface, their loyal customers will find the flow of operation to be much smoother than ever before. Don’t let the simple user operation fool you; Lowrance has built a technologically advanced unit with all the features you would expect.
Power output is measure in watts, often represented by the “W” symbol. With more power you’ll get clearer, more-accurate readings, and you’ll be able to find fish in deeper water. Units with limited power won’t always send the signal out far enough and you can get poor quality images. Look closely for a good power output and frequency options. The right combination can help you choose the right unit, based on overall ability. You’re looking for balance of depth, power and clarity of image.
You have been anxiously awaiting the arrival of the weekend so that you can pack up and hit your favorite fishing area. You dream of landing your next big catch, and a fish finder is just what you need to help you locate the ultimate fishing spot. If you love spending time in the great outdoors, then you can find just what you need to get ready for your next adventure. On eBay, you can browse through a large selection of fish finders in both new and refurbished conditions, available from trusted and reliable sellers. The Hummingbird fish finder can easily be attached to any surface on your boat and can aid you in discovering where the fish are hanging out. If you do not enjoy fishing yourself, but are looking for something to get the outdoorsman in your life, a portable fish finder is a perfect gift and sure to bring a smile. Shop easily online, check out convenient shipping options, and reel in an amazing deal on the perfect fish finder.
There is a huge variety of fish finder brands, their models and types. All this can make it quite complicated and time consuming to find the right one for your needs.  To help you in your search, we have compiled this best fish finder reviews of the models that are popular and top rated in 2017. With our reviews you can find the right fish finder for your style of fishing. To make sure that you get the right features for your needs, it’s important to do prior research. So read our reviews and comparisons to decide which model you need.
Commercial fishermen also make use of these characteristics. They conduct a search by low frequency (i.e., 15 kHz) beams first to grasp the general locations of fish schools around the boat. Subsequently, they narrow the search area for a fish school, using high frequency beams (200 kHz), to detect the exact location of the fish school and operate the boat to be directly above the targeted fish school.
Additional information for residents of Quebec only: The regular annual rate for persons applying for the Triangle credit card is 22.99% for cash transactions and related fees and 19.99% for all other charges. Some applicants may receive a higher or lower regular annual rate depending on a credit evaluation. The minimum payment is the sum of (a) interest and fees shown on your statement, (b) the greater of any amount past due or any balance over your credit limit, (c) the amount of any equal payments plan instalments then due, and (d) $10. Balances under $10 are due in full. For residents of Quebec, the period between the statement date and the due date for payment is 26 days. The billing period covered by each statement can be from 28-33 days. The Triangle Mastercard does not have an annual fee. Examples of borrowing costs (rounded to the nearest cent) assuming that all charges are purchases bearing interest at the regular annual rate of 19.99%, a 30 day month, no charges made on special payment plans and no other fees, additional payments or other changes are:
Inland fishfinding has changed, with high-frequency (455 or 800kHz) transducers that look to the side, straight down or can aim over a 360-degree range. Fishfinder manufacturers offer the inland angler a growing (and often confusing) assortment of choices in frequencies, beamwidths, even the underwater direction you can look. Inland anglers who search for fish in shallow lakes don’t need the power to see down to 5,000', but can gain a big advantage by looking out to the sides, so Garmin, Raymarine and Lowrance have products using multi-beam transducers for that purpose. Here’s where the Marketing Jargon takes over, with names like StructureScan HD™ and CHIRP DownVision.
The size of the area you’re scanning will be affected by the angle of the cone. A wide beam cone scans between 40°-60°, meaning you’ll be covering a large area. A narrow cone will scan between 10°-20°. So make sure you’re aware of whether your fish finder is using a wide or narrow cone when you’re looking at the data on your screen. The Deeper PRO and PRO+ have wide and narrow beam scanning (55° and 15°), the Deeper START has a medium/wide beam (40°). One other point to remember about how you sonar works is that it is constantly sending and receiving data, which means your display will be continually scrolling. The current scanning data will be on the right – the further left on the screen, the older the data.
KISS (the hottest band in the land): OK, maybe this won't be covered in my book, so I can talk about it now. I still can't believe that Madonna is in the Rock And Roll Hall of Fame, and Kiss is not. Kiss hasn't sold more albums than Madonna - not even close. Kiss hasn't collected more gold albums than Madonna - not even close. I guess Gene Simmons' "Family Jewels" really doesn't factor in to the overall calculations. Correct me if I'm wrong, but I don't think Madonna has ever used the words "rock and roll" in the lyrics of a song. Kiss, on the other hand has almost abused the phrase. But then, that's what a rock and roll band is likely to do.
Once you've got your rod and reel setup how you want it, pull the right fishing line and tackle for the waters you're fishing from your tackle box and get to work. Add a sinker for more depth or a floater that can help track your line. A thick fishing line and hook will provide more resistance for reeling in larger fish. If nothing's biting from the shore, why not load up your fishing tools into a fishing boat or raft and try exploring further out. Customize the power of your boat with a trolling motor or do things the old fashioned way with a canoe and paddles.
The use of the hook in angling is descended, historically, from what would today be called a "gorge". The word "gorge", in this context, comes from an archaic word meaning "throat". Gorges were used by ancient peoples to capture fish. A gorge was a long, thin piece of bone or stone attached by its midpoint to a thin line. The gorge would be fixed with a bait so that it would rest parallel to the lay of the line. When a fish swallowed the bait, a tug on the line caused the gorge to orient itself at right angles to the line, thereby sticking in the fish's gullet.
×