The temperature and pressure sensitivity capability of fish finder units allow one to identify the exact location of the fish in the water by the use of a temperature gauge.Functionality present in many modern fish finders also have track back capabilities in order to check the changes in movement in order to switch position and location whilst fishing.
Now let’s imagine another scenario – again your sonar is stationary, but this time 2 fish swim through your sonar beam, one big and one small. The big fish swims very quickly through the sonar beam, the small one swims slowly. Which one will make the longer fish arch on your screen? The answer is the small one. That’s because a slow moving object will leave a longer mark than a fast moving one, whatever their size.
These units are battery operated and the signal is transmitted back to the receiver. So, don't expect a lot of range or HD resolution. But, if you simply want to know how deep the water is ahead of you so that you can make better choices, this is it. For me, I would need to cast it with a rod/reel loaded with heavy braid. The areas I'd likely cast to would hopefully hold big snook and in the spring they love this color. I don't want the "dog ate my homework" story to become the "snook ate my transducer" story.
It is without a doubt that Lowrance has once again raised the bar for current technology. With their newly refined interface, their loyal customers will find the flow of operation to be much smoother than ever before. Don’t let the simple user operation fool you; Lowrance has built a technologically advanced unit with all the features you would expect.
The 256 color TFT screen gives a clear image that can give you readings of depths of up to 240 ft. The charge of the unit can last up to 30 hours. It features SideFinding sonar that gives accurate readings. Its benefit is that you can point it in any direction and get full coverage of the area to find more fish. The temperature feature is included.
A fish hook is a device for catching fish either by impaling them in the mouth or, more rarely, by snagging the body of the fish. Fish hooks have been employed for millennia by anglers to catch fresh and saltwater fish. Early hooks were made from the upper bills of eagles and from bones, shells, horns and thorns of plants (Parker 2002). In 2005, the fish hook was chosen by Forbes as one of the top twenty tools in the history of man.[2] Fish hooks are normally attached to some form of line or lure device which connects the caught fish to the angler. There is an enormous variety of fish hooks. Sizes, designs, shapes, and materials are all variable depending on the intended purpose of the hook. They are manufactured for a range of purposes from general fishing to extremely limited and specialized applications. Fish hooks are designed to hold various types of artificial, processed, dead or live baits (bait fishing); to act as the foundation for artificial representations of fish prey (fly fishing); or to be attached to or integrated into other devices that represent fish prey (lure fishing).
Setting your tip-up baits at the proper depth requires a little work. Then every time you catch a fish or check your bait, you need to reset them. If you’ve got a few nickel-size buttons, those resets become no chore at all. Start by running your main line through one hole in the button and out another. This should allow you to move the button up and down the line easily, but provide enough tension to stop it from sliding on its own. Next, attach your egg sinker, barrel swivel, leader, and hook to the line. Once your depth is set, simply slide the button down to the water’s surface, and then reel the button up to the tip-up’s line guide. Now every time you reset your line after catching a fish or changing bait, wind the spool until the button is at the tip-up guide. Your bait will be set in the same place within the water column every time.
The swivel sinker is similar to the plain one, except that instead of loops, there are swivels on each end to attach the line. This is a decided improvement, as it prevents the line from twisting and tangling. In trolling, swivel sinkers are indispensable. The slide sinker, for bottom fishing, is a leaden tube which allows the line to slip through it, when the fish bites. This is an excellent arrangement, as the angler can feel the smallest bite, whereas in the other case the fish must first move the sinker before the angler feels him.

Moreover, the 7SV also has a built in Garmin GPS that allows you to make your own waypoint maps, which makes marking all those stumps, docks, and brush piles as easy as clicking a button or two. All map information is transferrable to other Garmin fish finder devices if you upgrade as well, adding even more versatility to the 7SV. Additionally, the 7SV also has its own rechargeable battery pack that helps you stay on the water all day long, thereby increasing your chances of finally reeling in that trophy catch you’ve been looking for all these years.
Few things aggravate ice anglers more than frozen rod guides. Chipping away with fingernails, teeth, or anything else lying around can easily damage both the frame and rings of the guides, but you have to keep them clear because iced guides will weaken line, especially super-­light monofilament or fluorocarbon. There are a number of homebrew remedies for tackling this problem, but none are more effective than lip balm, which creates a film on guides that inhibits them from freezing and building ice. It’s waterproof and takes quite a while for wet line or precipitation to break it down and necessitate reapplication. A small stick or tin stores easily in your pocket, and just a few swipes with your finger on guide rings will protect them from ice-up for several hours.

Fully Networkable, 8” Touchscreen Chartplotter and Sonar. Garmin’s GPSMAP 7608xsv includes built in maps for Coastal and Lake mapping, a 10HZ GPS Receiver providing fast acquisition and position tracking. High Performance HD-ID Sonar, 1kW CHIRP, CHIRP DownVu and CHIRP SideVu. Now enjoy FLIR Camera Compatibility, Smart Boundaries and More. Transducer Required and Sold Separately.

To get the most of the both there’s the dual beam type of transducers. It’s also called dual frequency and which combines both features in one unit. Other types of transducers are more specialized. They include multiple beams (can be 4 or more). These cover a larger area of the underwater and can even give a 3D image on the display. One more option is the side beam transducer. These units shoot their signals to the sides, which increases the search area for fish.


Choosing the perfect fish finder for your requirement is hard with many features such as imaging, power and more. The main purpose of a fish finder is to catch more fish with the screen displaying the fish and underwater structure and physical objects. Other information such as water temperature and depth are common on the majority of devices with many high end fish finders providing much more.


Finally, we come to the HDS-7 from Lowrance. I have had limited experience with this company, but from what I know it is a fantastic maker of fish finders, and the HDS-7 is no exception. This particular model has a seven-inch touchscreen, which makes it one of the most high-tech options you can find anywhere. If you like a more ergonomic design and want something that is more user-friendly, the HDS-7 could be for you.
As we mentioned, the strength of a fish finder is in how well it can locate the fish, which is why you need a high-quality transducer. CHIRP technology is one of the best you can find, and it provides a 200-watt RMS signal that can reach down to 1,600 feet in fresh water and 750 feet in salt water. Overall, you can find plenty of fish with this device.

Just getting started using a fish finder? Know the basics but want to get more out of your fish finder? Not sure you’re reading your fish finder display correctly? Don’t worry, we’re here to help. This short tutorial will teach you how to make sense of your fish finder display so you can tell what’s a bait fish, what’s a trophy catch and what’s just a submerged tree that you’ll snag on. Take just 7 minutes to go through this tutorial and at the end you’ll be able to read your fish finder display for:
Simrad’s GO9 XSE Combination GPS/ Fishfinder offers a networkable 9” Touchscreen unit at an affordable price point. An Internal 10Hz GPS Receiver quickly and accurately locates position on the included C-Map Pro Charting while the included TotalScan Transom Mount Transducer provides detailed underwater images. Compatible with detailed mapping from C-MAP MAX-N, Navionics, Insight, Insight Genesis, and NV Digital Charts.

For deep-water fishermen, and those who spend much of their time angling in open water, a GPS is essential. When you are far from landmarks and familiar sight-lines, your chances of success can be much better when you can return to that favourite spot. Commercial-fishing pros understand this as well as anyone, which is why they invest in quality GPS equipment.


A fish finder is an incredible tool that can help take your sport or commercial fishing venture to the next level. However, even the best fish finders can use a little improvement – and adding a GPS is one way to do this.The best fishfinder GPS combo will help you navigate whatever body of water you are on at the same time as it allows you to find where to fish more quickly, accurately and efficiently.
The thickness of the line representing the bottom is also a great clue to bottom hardness. Here the rule is simple – the thicker the line, the harder the bottom. But, be careful – sonar sensitivity can affect how thick the line is. The Deeper display has adjustable sensitivity. So if you turn up the sensitivity to 100%, the bottom line may appear thicker, if you turn it down to 10% it may appear thinner. So practice adjusting the sensitivity and get used to judging how much the bottom thickness varies based on this.
Fishing nets are meshes usually formed by knotting a relatively thin thread. Between 177 and 180 the Greek author Oppian wrote the Halieutica, a didactic poem about fishing. He described various means of fishing including the use of nets cast from boats, scoop nets held open by a hoop, and various traps "which work while their masters sleep". Ancient fishing nets used threads made from leaves, plant stalk and cocoon silk. They could be rough in design and material but some designs were amazingly close to designs we use today (Parker 2002). Modern nets are usually made of artificial polyamides like nylon, although nets of organic polyamides such as wool or silk thread were common until recently and are still used.
1 Based on the level of net new purchases (purchases less credits) that are posted to your Gas Advantage Mastercard account in any monthly billing period, you will be entitled to a discount on each litre of gasoline or diesel fuel that is purchased for a motor vehicle at Canadian Tire Gas Bars during the following monthly billing period and that is charged to your Gas Advantage Mastercard. The discount that you receive in a billing period will be reduced to 2¢ per litre after you have made purchases of more than $500 for gasoline, diesel fuel or any other sundry items at Canadian Tire Gas Bars during that billing period using your Gas Advantage Mastercard. For complete program details please read the Canadian Tire Gas Advantage Mastercard Terms and conditions.

Setting your tip-up baits at the proper depth requires a little work. Then every time you catch a fish or check your bait, you need to reset them. If you’ve got a few nickel-size buttons, those resets become no chore at all. Start by running your main line through one hole in the button and out another. This should allow you to move the button up and down the line easily, but provide enough tension to stop it from sliding on its own. Next, attach your egg sinker, barrel swivel, leader, and hook to the line. Once your depth is set, simply slide the button down to the water’s surface, and then reel the button up to the tip-up’s line guide. Now every time you reset your line after catching a fish or changing bait, wind the spool until the button is at the tip-up guide. Your bait will be set in the same place within the water column every time.


Screen Color & Resolution is an essential factor in your selection. Color screens are the new norm on today’s fish finders. A color screen enables you to more easily decipher objects in the water, giving you valuable insight into your game fish. Also consider the amount of pixels on your screen—the more pixels, the greater level of detail you can see. LED backlit screens provide brilliant visual display, particularly for fishing in low-light conditions.

As with many products, you’ll have to pay close attention to the specific features delivered for the price, simply because the investment for combination fishfinder and GPS can range from $500 to $1200 or more. Fishfinders and GPS units are well advanced when compared to equipment used just a few years ago. Most of the time you can get excellent 3D mapping, scanning, charting and navigation at a very reasonable price. It’s not necessary to spend hundreds more unless you really want to go after the top-of-the-line unit.
Just getting started using a fish finder? Know the basics but want to get more out of your fish finder? Not sure you’re reading your fish finder display correctly? Don’t worry, we’re here to help. This short tutorial will teach you how to make sense of your fish finder display so you can tell what’s a bait fish, what’s a trophy catch and what’s just a submerged tree that you’ll snag on. Take just 7 minutes to go through this tutorial and at the end you’ll be able to read your fish finder display for:
A GPS also gives you navigation through the waters. For this you will need to select a unit that comes with background maps and charts. One more benefit of the addition of the GPS is safety. Wherever you fish, you will have the confidence that at the end of the day the GPS will easily point you home. For example, you could be fishing throughout different locations during the day, or you could lose sight of land, or some severe weather could suddenly roll out. In such situations, a GPS will give you the exact direction to your home and will tell you how far it is.
You probably already know how to use a Garmin chartplotter. It is that intuitive. Just turn it on and you can quickly follow the simple menu. Everything is at your fingertips to quickly and easily plan your route and set your course. And most Garmin echoMAP™ and GPSMAP® chartplotters are available combined with built-in sonar capabilities. These include advanced HD-ID™ sonar, CHIRP sonar and Garmin ClearVü™ and SideVü™ scanning sonar, which provides the clearest scanning sonar images on the water.

Lowrance hds 7 gen 2 touch. Took it off my boat when I got low balled on price of boat.... I think it has less the an hour on it... I honestly dont remember using it at all. Regardless, it has very very low hours if it was used at all. No ducer, wire or mounts come with this. Buyer of my boat literally handed me cash that was 500.00 short so I took it, unplugged this and walked away. Perfect for someone that already has lowrance set up on boat. Selling with no reserve. So good luck.


Best of all though, the Helix 7 is a complete package, and includes underwater sonar transducer and all necessary mounting hardware for quick and easy installation on your boat. All you need to do is power up the device, toss the transducer in the water, and wait for sonar returns to start rolling in. Make every fishing expedition a trophy winner with the Humminbird Helix 7 CHIRP DI GPS G2 Fishfinder.
It’s no secret that HDS displays are used by more tournament fishing pros than all other fishfinding brands combined, so we didn’t have to go back to the drawing board to build it; we just made the best fishfinder/chartplotter in the world even better. HDS LIVE  delivers premium performance and support for the best collection of innovative sonar features available – from Active Imaging™, StructureScan® 3D, FishReveal™ and LiveSight™ sonar, to exciting navigation functionality like C-MAP® Genesis Live mapping – all designed to help you find more fish.

Furthermore, Garmin’s fish finder also has a built-in CHIRP continuous sweep sonar that provides the widest range of sonar profile information available, allowing you to find and mark where the fish like to hide more accurately. Best of all though, the transducer on the 7SV offers “sideview” sonar for a clearer picture of what is around you and your boat while you are out on the water.


Shipping is always free for parts and accessories for all our Marine Electronics. We have just about any replacement part that you would need to repair your HawkEye product, and a vast amount of marine accessories to customize your boating and fishing experience. Whether you are looking into our cable float kit or replacement lens for your hand held depth sounder, we have it all.
The common earthworm is a universal bait for fresh water angling. In the quest for quality worms, some fishers culture their own worm compost or practice worm charming. Grubs and maggots are also considered excellent bait when trout fishing. Grasshoppers, flies, bees and even ants are also used as bait for trout in their season, although many anglers believe that trout or salmon roe is superior to any other bait. Studies show that natural baits like croaker and shrimp are more recognized by the fish and are more readily accepted. A good bait for red drum is menhaden.[5] Because of the risk of transmitting whirling disease, trout and salmon should not be used as bait.
×