Simrad’s GO9 XSE Combination GPS/ Fishfinder offers a networkable 9” Touchscreen unit at an affordable price point. An Internal 10Hz GPS Receiver quickly and accurately locates position on the included C-Map Pro Charting while the included TotalScan Transom Mount Transducer provides detailed underwater images. Compatible with detailed mapping from C-MAP MAX-N, Navionics, Insight, Insight Genesis, and NV Digital Charts.
The intensity of the sonar return from a hard bottom will be different to one from a hard bottom. Your fish finder uses colour to show this difference. In the standard colour palette of the Deeper display, the colour varies from dull brown (softest) to intense orange (hardest). In the day mode colour palette (see screen shot), the difference is even easier to see, with the colour ranging from purple (softest) to red to orange to yellow (hardest).

PERMANENT INSTALLATION: I say an installation is permanent once you start drilling holes. A permanent installation will require you to provide power/wiring, physically mount the transducer, and mount the fish finder itself. A few years ago, these things were a lot tougher to do - similar to baking a cake from scratch. I don't like the notion of "trial and error" when I have a drill in my hand. But now that our sport has become more mainstream, products are being offered specifically for kayaks, and fish finder installation can be so easy, even Betty Crocker could do it.
The last model we would like to mention in our top 12 list is a model also from the Humminbird brand. It’s also one of the best inexpensive fish finder models. It comes with a black and white display. The sonar is dual beam and its frequency (200/455 kHz) allows viewing readings of depths of up to 600 feet. It’s also a small fish finder with the display being just 4 inches. The clear edge grayscale display clearly shows everything even in direct sunlight.

It terms of the functionality, the HDS-7 is able to connect to the internet to broadcast data, update to new software, upload information such as marked coordinates and more. This Lowrance model uses the latest of advanced technologies such as CHIRP sonar, Broadband sounder, StructureScan HD, DownScan imaging and Trackback view for the ultimate fish finding experience.

Fishing with a hook and line is called angling. In addition to the use of the hook and line used to catch a fish, a heavy fish may be landed by using a landing net or a hooked pole called a gaff. Trolling is a technique in which a fishing lure on a line is drawn through the water. Snagging is a technique where the object is to hook the fish in the body.
WIRING: It's like Christmas lights … once you get a good power source you can really go crazy. I guess that's one of the reasons I've never added a power grid to one of my boats. Sure as I do, I'll have dash lights, bow/stern lights, and an 18" subwoofer (though a pair of 10's would probably work just as well). Once you are set up with a 12 volt system, anything that will connect on a go-boat will now connect in your row-boat. Those are scary possibilities indeed. You'll need to keep the battery stationary, as dry as possible, and make it easy to get at for removal and recharging. The easiest choice would be to mount it in the front hatch area. The battery is actually pretty small, so you won't need a lot of room.
Just getting started using a fish finder? Know the basics but want to get more out of your fish finder? Not sure you’re reading your fish finder display correctly? Don’t worry, we’re here to help. This short tutorial will teach you how to make sense of your fish finder display so you can tell what’s a bait fish, what’s a trophy catch and what’s just a submerged tree that you’ll snag on. Take just 7 minutes to go through this tutorial and at the end you’ll be able to read your fish finder display for:
Having a GPS onboard is something I've wanted for a while, so that makes the Humminbird 385CI a powerful combo to me. I love "jungle fishing", getting back in mangroves and other areas that are loaded with structure. It's also easy to get turned around in those areas because if you're concentrating on fishing it's easy to lose track of where you are, where you've been, and how to get back to the launch. Obviously, this will help. Between having built in navigational charts and doing your own recon concerning tides for the day, you can make better choices as to where you want to fish.
2. Save numerous locations and data for accurate and successful fishing next time out – You navigate quickly and accurately to your top fishing spot, then save the locations so you can return to them later. Reduction in physical size has been accompanied by massive increases in computer memory, so you can have the information on numerous locations ready to use every time you go, no matter where you go.

The size of the area you’re scanning will be affected by the angle of the cone. A wide beam cone scans between 40°-60°, meaning you’ll be covering a large area. A narrow cone will scan between 10°-20°. So make sure you’re aware of whether your fish finder is using a wide or narrow cone when you’re looking at the data on your screen. The Deeper PRO and PRO+ have wide and narrow beam scanning (55° and 15°), the Deeper START has a medium/wide beam (40°). One other point to remember about how you sonar works is that it is constantly sending and receiving data, which means your display will be continually scrolling. The current scanning data will be on the right – the further left on the screen, the older the data.
Look for equipment that will work with multiple frequency: higher for better detail but not as successful in deep water; lower for depth but less detail on your viewing screen. Of course, if you fish only in shallow water, you’ll be happier with high-frequency output. For deep-water work and for commercial fishing, you may want to use a lower frequency.
With the Fish Symbol feature disabled, an angler can learn to distinguish between fish, vegetation, schools of baitfish or forage fish, debris, etc. Fish will usually appear on the screen as an arch. This is because the distance between the fish and the transducer changes as the boat passes over the fish (or the fish swims under the boat). When the fish enters the leading edge of the sonar beam, a display pixel is turned on. As the fish swims toward the centre of the beam, the distance to the fish decreases, turning on pixels at shallower depths. When the fish swims directly under the transducer, it is closer to the boat so the stronger signal shows a thicker line. As the fish swims away from the transducer, the distance increases, which shows as progressively deeper pixels.
This unit has a colorful and compact 3.5 inch color screen that is fully equipped with a Garmin high-sensitivity GPS and Garmin’s very own Sonar, which uses Garmin CHIRP ClearVu Scanning. This GPS gives you the ability to mark your favorite hotspots and fishing areas, docks, and slipways, while using high-speed data technology to display any information that you may need, immediately on the screen.
How to choose a fish finder? There are so many fish finder brands and models of fish locators available that it can be quite difficult to figure out which one would best meet your needs and your individual fishing style. Moreover, it’s also easy to get lost in transducers, echoes, sonar, flashers and transom mounts. The most important thing to keep in mind when choosing a good fish finder is the question: will it help you to catch more fish? To make this choosing process less complicated and so you can understand more about fish detector features we have compiled this buying guide. Using this information will help you to make the best choice.

Pinpoint your favorite waypoints and track fish with a fishfinder from Academy Sports + Outdoors. With a detailed black-and white LCD display, you can clearly spot fish as deep as 1,000' as well as track their location with depth finder technology. Water temperature sensors allow you to monitor the biological patterns of prospective catches, letting you pinpoint where they'll be at any time of day. With a waterproof casing, our selection of fishfinders are designed for use on boats or kayaks. Our giant boating and marine shop has an assortment of marine electronics from popular brands, like Humminbird, Garmin marine and Lowrance, can help you reel in the largest catch. Receive notifications for certain depths and types of fish, as well as sonar and mapping software, so you can find exactly what you're looking for.

The temperature and pressure sensitivity capability of fish finder units allow one to identify the exact location of the fish in the water by the use of a temperature gauge.Functionality present in many modern fish finders also have track back capabilities in order to check the changes in movement in order to switch position and location whilst fishing.

Commercial fishermen also make use of these characteristics. They conduct a search by low frequency (i.e., 15 kHz) beams first to grasp the general locations of fish schools around the boat. Subsequently, they narrow the search area for a fish school, using high frequency beams (200 kHz), to detect the exact location of the fish school and operate the boat to be directly above the targeted fish school.
The image to the right shows a school of white bass aggressively feeding on a school of threadfin shad. Note the school of baitfish near the bottom. When threatened, baitfish form a tightly packed school, as the individuals seek safety in the center of the school. This typically looks like an irregularly shaped ball or thumbprint on the fishfinder screen. When no predators are nearby, a school of baitfish frequently appears as a thin horizontal line across the screen, at the depth where the temperature and oxygen levels are optimal. The nearly-vertical lines near the right edge of the screen show the path of fishing lures falling to the bottom.

The final point to remember when you are looking out for fish arches is that it doesn’t need to be a full arch. Half arches (like the ones shown in the screen shot above) also show that there is fish. In ourtutorial on how sonars work, we explain in detail why sometimes you get a full arch and sometimes you get a half arch. The short answer is that you will get a full arch if a fish swims through the whole of your sonar cone, and a half or partial arch if they only swim through part of it.
Portable fish finders are the better choice for those who lease their boat. Also if you ice fish or “fly-in” fish, a portable unit would be more suitable for you. They usually come with their own carrying case and battery power supply. Most of the fish locators come with the transom mount for installation. The portable units come with the transducer already attached to the transom with the use of a suction cup.
We only carry fishing necessities that are reliable and crafted with unparalleled attention to detail. Our products are up for anything you are, created by top-tier brands known for providing nothing less than the best. It's important to keep quality and safety in mind when heading out to get your catch of the day, which is why you'll find only the best in our unparalleled selection of equipment for fishing. We carry trusted brands such as Shimano, Rapala, Tournament Choice, Berkley and more. You need to stay focused while out on the water, which means not being distracted by poor quality gear for fishing or tools that don't work properly. We're here to help you find whatever you need for any kind of adventure, whether you're a beginner or a pro. Make us your go-to destination for all your fishing needs, and we can bet you'll be happy with our diverse selection of essentials. Rain or shine, you can find what you need to make the most out of your experience.
×