A fishing line is a cord used or made for fishing. The earliest fishing lines were made from leaves or plant stalk (Parker 2002). Later lines were constructed from horse hair or silk thread, with catgut leaders. From the 1850s, modern industrial machinery was employed to fashion fishing lines in quantity. Most of these lines were made from linen or silk, and more rarely cotton.[3]
MOUNTING THE FISHFINDER: Cockpit space in any paddle craft is premium real estate, so definitely do some planning before you do some drilling. The carpenters pencil is your friend in this case. I suggest that before you drill/cut, you spend some time on the water and use that pencil to mark up potential mounting spots. You have to be able to see it well and to reach it, but it needs to be out of the way when you cast, land a fish, or get in/out of your boat. If your boat has some sort of console, that's an obvious mounting choice. But, if you don't then Ram Mounts offers a number of multi-position solutions that will allow you to mount it just about anywhere. Once you decide where it will go, you have to get the wiring to the battery and to the transducer.

Lowrance hds 7 gen 2 touch. Took it off my boat when I got low balled on price of boat.... I think it has less the an hour on it... I honestly dont remember using it at all. Regardless, it has very very low hours if it was used at all. No ducer, wire or mounts come with this. Buyer of my boat literally handed me cash that was 500.00 short so I took it, unplugged this and walked away. Perfect for someone that already has lowrance set up on boat. Selling with no reserve. So good luck.
Whatever species you are hunting, knowing the hardness of the lake bottom and its consistency is another key piece of knowledge when you are trying to crack the code and get the fish biting.There are 3 factors to consider when working out if the bottom displayed on your fish finder is hard or soft: bottom colour, bottom thickness, and the presence of a 2nd bottom return or not.
The size of the area you’re scanning will be affected by the angle of the cone. A wide beam cone scans between 40°-60°, meaning you’ll be covering a large area. A narrow cone will scan between 10°-20°. So make sure you’re aware of whether your fish finder is using a wide or narrow cone when you’re looking at the data on your screen. The Deeper PRO and PRO+ have wide and narrow beam scanning (55° and 15°), the Deeper START has a medium/wide beam (40°). One other point to remember about how you sonar works is that it is constantly sending and receiving data, which means your display will be continually scrolling. The current scanning data will be on the right – the further left on the screen, the older the data.

Early sporting fathometers for recreational boating used a rotating light at the edge of a circle which flashed in sync with the received echo, which in turn corresponded to depth. These also gave a small flickering flash for echos off of fish. Like today's low-end digital fathometers, they kept no record of the depth over time and provided no information about bottom structure. They had poor accuracy, especially in rough water, and were hard to read in bright light. Despite the limitations, they were still usable for rough estimates of depth, such as for verifying that the boat had not drifted into an unsafe area.
The intensity of the sonar return from a hard bottom will be different to one from a hard bottom. Your fish finder uses colour to show this difference. In the standard colour palette of the Deeper display, the colour varies from dull brown (softest) to intense orange (hardest). In the day mode colour palette (see screen shot), the difference is even easier to see, with the colour ranging from purple (softest) to red to orange to yellow (hardest).
LCD displays are made of a grid of “picture elements,” tiny dots that individually darken when electrical current is applied, with their name shortened in common usage to “pixel.” More vertical pixels mean higher depth resolution, as each pixel represents less depth. The number of pixels in a screen’s horizontal axis determines how long objects stay onscreen before they scroll out of view, of significant importance with split-screen displays showing narrow columns of side-by-side information.

Ice fishing is work. Just to get a line wet, you’ve got to drill and scoop. Just to keep a line wet, you’ve got to clear ice from the guides. There are a ton of little things that can make a hard-water outing much more challenging than fishing on a sunny summer afternoon, so it should be no surprise that smart ice anglers have come up with a pile of gear hacks to make any day on a frozen lake a little easier, more comfortable, and a lot fishier. You could fill a book with these tricks, but here are four that every serious ice fisherman should know. They all require a few inexpensive items you probably have lying around at home.


Fish finders are incredibly valuable tools, and the more you learn about how to read them, the more successful your fishing trips will be. A key part of learning as angler is to go from trial and error to a more knowledge-based approach. Maybe you regularly catch at a certain spot with a certain presentation – but do you know why? A fish finder will help you understand not just your failures, but also your successes. And once you know this, you can recreate this success more easily.
Fish finders were derived from fathometers, active sonar instruments used for navigation and safety to determine the depth of water.[1] The fathom is a unit of water depth, from which the instrument gets its name. The fathometer is an echo sounding system for measurement of water depth. A fathometer will display water depth and can make an automatic permanent record of measurements. Since both fathometers and fishfinders work the same way, and use similar frequencies and can detect both the bottom and fish, the instruments have merged.[2]

The best value fish finder models that we have listed above are the most popular in 2014. All of them have high fish finder ratings and predominantly positive reviews of the users. According to your needs, one model or other might be a better choice for you. When you compare fish finders, you should consider your budget and the features you would like the fish finder you are looking for to have. Before choosing fish finder, you need to decide do you need a portable unit or a fixed one for mounting onto your boat. Also consider will a fish finder be sufficient for your needs or do you also need an integral GPS in the unit. We hope that with the information that I have provided in this best fish finder reviews, you will find a fish finder that will help you catch more fish.


Hockey tape was made for the ice, and even though hard-water anglers are looking for a different kind of score, they should always have a roll on hand. A few wraps around the butt and foregrip of any jigging rod immediately improves the hold and comfort, but hockey tape can be used on any ice tool. If you’ve ever had the cheap rubber handle cover disappear from your ice scooper, you know the feeling of metal freezing to a glove or the burning sting of touching it with your bare hand. A few wraps of hockey tape can easily fix that. Should your bibs or jacket get hooked or ripped, the hockey tape will keep a tear from getting worse until you can make a permanent repair.

Other devices which are widely used as bite indicators are floats which float in the water, and dart about if a fish bites, and quiver tips which are mounted onto the tip of the fishing rod. Bite alarms are electronic devices which bleep when a fish tugs a fishing line. Whereas floats and quiver tips are used as visual bite detectors, bite alarms are audible bite detectors.
A GPS is a must have for many fishers and having it in one unit with a fish detector is economical, space saving and convenient. Having the addition of a GPS gives you many benefits. It will give you the ability to mark hot fishing spots and easily return to them in the future, as you can mark the spot on the GPS and then track your way back to it later. These spots are called waypoints and on most units you will be able to mark hundreds or even thousands of them.

A fish finder is a sonar instrument that is designed for the specific purpose of detecting fish underwater. It does so by detecting reflected impulses of sounds energy. All the electronic impulses that are reflected off fish are converted into information that is then display in graphic rendition on the screen of the fish finder. In addition to locating fish, these units also measure the depth of the water, locating underwater debris, and bottom structure. The image on the screen of the fish finder can represent just one fish in the form of a small icon or with a series of arches.


A fishing rod is an additional tool used with the hook, line and sinker. A length of fishing line is attached to a long, flexible rod or pole: one end terminates with the hook for catching the fish. Early fishing rods are depicted on inscriptions in ancient Egypt, China, Greece and Rome. In Medieval England they were called angles (hence the term angling). As they evolved they were made from materials such as split Tonkin bamboo, Calcutta reed, or ash wood, which were light, tough, and pliable. The butts were frequently made of maple. Handles and grips were made of cork, wood, or wrapped cane. Guides were simple wire loops.
There is not much that is more relaxing than spending a beautiful day out fishing in your boat. One thing that may make the day even better is a fish finder GPS, so you do not go home without some delicious fish for dinner. On eBay, reliable sellers offer a broad range of new and used fish finders for you to choose from, including brands like Garmin, Lowrance, Eagle, and Hummingbird. With your new color GPS fish finder, you can enjoy a full color display, along with features that may include screenshots, fish and depth alarms, zoom, and dual imaging. The Garmin 546S Marine GPS find finder, for example, features a chart plotter, sonar, an anchor alarm, sunrise and sunset calculator, and marine cartography software included. No matter which fish finder GPS you decide upon, feel confident that you are receiving high-quality products and convenient shipping options that will ensure that your order makes it to you quickly.
† In the form of electronic Canadian Tire Money® (CT Money®). To collect bonus CT Money you must present a Triangle Rewards card/key fob, or use any approved Cardless method, at time of purchase or pay with a Triangle Mastercard®, Triangle World Mastercard® or Triangle World Elite Mastercard®. You cannot collect paper Canadian Tire Money on bonus offers. Any bonus multiplier is based on the base rate of collecting CT Money, and will be added to whatever the Member would otherwise collect, without the bonus. Not all items sold at Canadian Tire are eligible to earn CT Money. Terms and conditions apply to collecting and redeeming. Visit triangle.com for more information. The offered rate is exclusive of any bonus or promotional offers or redemption transactions. CT Money is collected on the pre-tax amount of the purchase. Bonus CT Money collected from online orders will be applied to the member’s triangle rewards™ account within 5 weeks of the purchase date.
Offering popular premium features at a more affordable price than any display in its category, Elite Ti2 gives anglers a level of powerful fishfinding and navigation functionality usually reserved for more expensive fishfinder/chartplotters. From Active Imaging™ support , FishReveal™ and built-in Genesis Live onscreen mapping to features that make your life easier on the water, like an easy-to-use touchscreen, wireless networking, smartphone notifications and trolling motor/Power Pole® integration – Elite Ti2 was designed to help you have an easier time finding fish.

In operation, an electrical impulse from a transmitter is converted into a sound wave by an underwater transducer, called a hydrophone, and sent into the water.[3] When the wave strikes something such as a fish, it is reflected back and displays size, composition, and shape of the object. The exact extent of what can be discerned depends on the frequency and power of the pulse transmitted. Knowing the speed of the wave in the water, the distance to the object that reflected the wave can be determined. The speed of sound through the water column depends on the temperature, salinity and pressure (depth). This is approximately c = 1404.85 + 4.618T - 0.0523T2 + 1.25S + 0.017D (where c = sound speed (m/s), T = temperature (degrees Celsius), S = salinity (per mille) and D = depth).[4] Typical values used by commercial fish finders are 4921 ft/s (1500 m/s) in seawater and 4800 ft/s (1463 m/s) in freshwater.
Whether you're off to a nearby stream for some fly fishing or heading out into the open waters for a deep sea fishing adventure, the right fishing gear will make your trip even more exciting. When the weather's nice, find a quiet spot to cast your line with a new fishing reel. Pick up a rod and reel combo that's ready to go right out of the box or customize your fishing gear with a separate rod and reel.

How to choose a fish finder? There are so many fish finder brands and models of fish locators available that it can be quite difficult to figure out which one would best meet your needs and your individual fishing style. Moreover, it’s also easy to get lost in transducers, echoes, sonar, flashers and transom mounts. The most important thing to keep in mind when choosing a good fish finder is the question: will it help you to catch more fish? To make this choosing process less complicated and so you can understand more about fish detector features we have compiled this buying guide. Using this information will help you to make the best choice.
The last model we would like to mention in our top 12 list is a model also from the Humminbird brand. It’s also one of the best inexpensive fish finder models. It comes with a black and white display. The sonar is dual beam and its frequency (200/455 kHz) allows viewing readings of depths of up to 600 feet. It’s also a small fish finder with the display being just 4 inches. The clear edge grayscale display clearly shows everything even in direct sunlight.
The common earthworm is a universal bait for fresh water angling. In the quest for quality worms, some fishers culture their own worm compost or practice worm charming. Grubs and maggots are also considered excellent bait when trout fishing. Grasshoppers, flies, bees and even ants are also used as bait for trout in their season, although many anglers believe that trout or salmon roe is superior to any other bait. Studies show that natural baits like croaker and shrimp are more recognized by the fish and are more readily accepted. A good bait for red drum is menhaden.[5] Because of the risk of transmitting whirling disease, trout and salmon should not be used as bait.
×