Transducers: Fishfinders operate using a single frequency transducer, dual frequencies, multiple frequencies or a broadband CHIRP system. In general, higher frequencies give the finest detail resolution, the least background noise on your screen and the best view from a fast-moving boat, but don’t penetrate as deeply as lower frequencies. Shallow-water inland anglers generally choose higher frequencies of 200kHz, 455kHz or 800kHz. For maximum depth, use lower frequencies. We recommend 200kHz or higher (up to 800kHz) for water depths up to 200' and 80kHz or 50kHz for deeper waters.

These sonar reflections will also display on the screen. So this way a fishfinder reads and lets you view the bottom and everything it encounters in between. The angle of the sonar beam is measured in degrees and it’s called the cone angle. A wider angle covers more area underwater. Different fish detector models come with different cone angles. Some models also include multi-beam sonar technology that allows covering a much wider area.


A fish finder is an incredible tool that can help take your sport or commercial fishing venture to the next level. However, even the best fish finders can use a little improvement – and adding a GPS is one way to do this.The best fishfinder GPS combo will help you navigate whatever body of water you are on at the same time as it allows you to find where to fish more quickly, accurately and efficiently.
Hello there! My name is Rick and you’ve probably come across my website because you’re in search of a product that will make your fishing experience easier and more effective. Or maybe you are just looking for information to get a better understanding of fish finders. In any case, you’ve come to the right place. I’m not a professional in this industry, I’m just a fishing enthusiast and during my search for the best fish finder on the market I’ve learned quite a few things about them. To give you the benefit of all the research I’ve done, I’ve created this website.
Pay a bit more and you get a bit more with the Humminbird Helix 7 SI GPS. The screen is massive, compared to other combination units – 12 inches with 1280×800 pixel resolution. The any-angle viewing and reduced glare are excellent. The Humminbird also has the electronic capability to support almost any advanced feature you can imagine, including, of course, precision GPS.
2-4 PERSON CAPACITY: Comfortably sized 2-4 people capacity including set-up dimensions of 81" x 71" and 71" high with plenty of room to fish and even stand up inside of.|POP-UP STYLE SETUP: Sets up super quick and tears down just as easily by simply pulling up on the roof and then on all four sides so youÆll be good to go in minutes.|FULLY INSULATED FABRIC: Features 300 denier insulated oxford fabric with frost-resistance up to 22 degrees Fahrenheit to keep you warm no matter the weather.|DURABLY DESIGNED: Includes solid fiberglass poles, diecast hubs, and heavy duty zippers designed for repeated use plus 4 strong ground stakes and 4 pull ropes.|WELL-VENTILATED ACCESS: Two zippered doors on opposite ends and hook and loop fastened windows allow for easy access and provide a well-ventilated.

For precise detection of structures and fish, our Raymarine radar bundle gives you remarkable resolution. The Garmin Chartplotter radar combo updates your position 10 times per second to accurately maintain your heading. A large screen with an outstanding LED display on our Humminbird fish finder GPS provides images that are easy to read even in bright sunny conditions. You can find the best marine depth finder GPS combo here, and we stand behind all of our products with a 30-day guarantee against defects. Contact our team of experts if you should need any assistance in finding the products you require.
How to choose a fish finder? There are so many fish finder brands and models of fish locators available that it can be quite difficult to figure out which one would best meet your needs and your individual fishing style. Moreover, it’s also easy to get lost in transducers, echoes, sonar, flashers and transom mounts. The most important thing to keep in mind when choosing a good fish finder is the question: will it help you to catch more fish? To make this choosing process less complicated and so you can understand more about fish detector features we have compiled this buying guide. Using this information will help you to make the best choice.

BABY STEPS: You don't have to spend a ton of money or be an engineer to get your kayak electrified. Here we have the Lowrance X50DS. The fishfinder and the installation kit will run around $250. Look at what you spend for a rod/reel/braided line, and you'll find this kit is certainly affordable. The display is 4-level grayscale, and the battery pack contains AA batteries. However, what it may lack in fashion it makes up by function. The battery pack goes in a dry bag, and the unit itself is easily removed at the end of the day. It features a built in temperature sensor and 120 degrees of wide angle coverage.
With the Fish Symbol feature disabled, an angler can learn to distinguish between fish, vegetation, schools of baitfish or forage fish, debris, etc. Fish will usually appear on the screen as an arch. This is because the distance between the fish and the transducer changes as the boat passes over the fish (or the fish swims under the boat). When the fish enters the leading edge of the sonar beam, a display pixel is turned on. As the fish swims toward the centre of the beam, the distance to the fish decreases, turning on pixels at shallower depths. When the fish swims directly under the transducer, it is closer to the boat so the stronger signal shows a thicker line. As the fish swims away from the transducer, the distance increases, which shows as progressively deeper pixels.
Modern lines are made from artificial substances, including nylon, polyethylene, dacron and dyneema. The most common type is monofilament made of a single strand. Anglers often use monofilament because of its buoyant characteristics and its ability to stretch under load. Recently alternatives such as fluorocarbon, which is the least visible type, and braided fishing line, also known as 'superlines' because of their small diameter, minimal amount of stretch, and great strength relative to standard nylon monofilament lines.
The temperature and pressure sensitivity capability of fish finder units allow one to identify the exact location of the fish in the water by the use of a temperature gauge.Functionality present in many modern fish finders also have track back capabilities in order to check the changes in movement in order to switch position and location whilst fishing.

LCD displays are made of a grid of “picture elements,” tiny dots that individually darken when electrical current is applied, with their name shortened in common usage to “pixel.” More vertical pixels mean higher depth resolution, as each pixel represents less depth. The number of pixels in a screen’s horizontal axis determines how long objects stay onscreen before they scroll out of view, of significant importance with split-screen displays showing narrow columns of side-by-side information.
The depth scale on the right of the screen enables you to identify the depth of any features you find. The depth reading in the top right of the screen shows you the bottom depth under your fish finder right now – bear in mind this is not necessarily the same depth as the features you have just scanned, especially if you are scanning drop offs or points.
Fish icons are a useful tool when you are getting started with a sonar device: your fish finder interprets the sonar data it receives and tries to work out if it is a fish or not. It does this based on factors like the size of the object and the strength of the sonar return. In the case of Deeper sonars, we use an advanced algorithm in the Deeper App to interpret the data. Unfortunately, even the most advanced units aren’t 100% accurate in interpreting correctly.

Simrad’s GO9 XSE Combination GPS/ Fishfinder offers a networkable 9” Touchscreen unit at an affordable price point. An Internal 10Hz GPS Receiver quickly and accurately locates position on the included C-Map Pro Charting while the included TotalScan Transom Mount Transducer provides detailed underwater images. Compatible with detailed mapping from C-MAP MAX-N, Navionics, Insight, Insight Genesis, and NV Digital Charts.


Experience the thrill of catching bigger fish, more often! Utilize quality fishing gear from Bass Pro Shops and expect a great day on the water. Find Fishing Rods, Fishing Reels, and Fishing Accessories in all of the top brands. Complete your arsenal with the best Fishing Lures and Terminal Tackle in the game. For anglers that like to pursue trophies in Fly Fishing, Ice Fishing, or Saltwater Fishing, find all of your specialty gear here. Be sure to check out our Rod Storage and Tackle Storage solutions to keep your fishing gear in top condition for years to come. From getting your catch on the line, in the boat and to the frying pan or weigh-in, Bass Pro Shops has all of the fishing equipment you need.
×