Finally, we come to the HDS-7 from Lowrance. I have had limited experience with this company, but from what I know it is a fantastic maker of fish finders, and the HDS-7 is no exception. This particular model has a seven-inch touchscreen, which makes it one of the most high-tech options you can find anywhere. If you like a more ergonomic design and want something that is more user-friendly, the HDS-7 could be for you.
ONE SMALL STEP FOR MAN, ONE GIANT LEAP FOR PADDLING_KIND: In the 2009 ICAST article, I mentioned a combo system that was in the new products exhibit, but wasn't available at the time of the show. It's most certainly available now, and that unit is the Humminbird 385CI. Like us, fish seek comfort, safety, and food. This unit will allow you to gather "data" that you can process in to fish finding "information".
Hello there! My name is Rick and you’ve probably come across my website because you’re in search of a product that will make your fishing experience easier and more effective. Or maybe you are just looking for information to get a better understanding of fish finders. In any case, you’ve come to the right place. I’m not a professional in this industry, I’m just a fishing enthusiast and during my search for the best fish finder on the market I’ve learned quite a few things about them. To give you the benefit of all the research I’ve done, I’ve created this website.
Fishing traps are culturally almost universal and seem to have been independently invented many times. There are essentially two types of trap, a permanent or semi-permanent structure placed in a river or tidal area and pot-traps that are baited to attract prey and periodically lifted. They might have the form of a fishing weir or a lobster trap. A typical trap can have a frame of thick steel wire in the shape of a heart, with chicken wire stretched around it. The mesh wraps around the frame and then tapers into the inside of the trap. When a fish swims inside through this opening, it cannot get out, as the chicken wire opening bends back into its original narrowness. In earlier times, traps were constructed of wood and fibre.
BUT DOES A FISHFINDER REALLY FIND FISH? Does a woodchuck really chuck wood? Sorry jackwagon, I had to go there. A fishfinder works on the same theory as deep space telescopes identifying distant stars. It doesn't see "fish" but it does see things that don't look like water. Once the data is processed, the resulting image is therefore labeled fish. Therefore, these units absolutely process the data and tell you if fish are in the beam. But alas, they don't know what they're eating, or if they're even in the mood to eat. But, I do believe that fish will almost always eat if given the right offering. But, you have to find them first.
You probably already know how to use a Garmin chartplotter. It is that intuitive. Just turn it on and you can quickly follow the simple menu. Everything is at your fingertips to quickly and easily plan your route and set your course. And most Garmin echoMAP™ and GPSMAP® chartplotters are available combined with built-in sonar capabilities. These include advanced HD-ID™ sonar, CHIRP sonar and Garmin ClearVü™ and SideVü™ scanning sonar, which provides the clearest scanning sonar images on the water.
When checking the transducer, the most important feature is the cone angle. For a bigger perspective of the verges underneath, choose a bigger degree on the cone. The wider beam gives more coverage of the under water and allows locating more fish within it. However, its drawback is the quick loss of strength. Due to this, it cannot penetrate the water as deep as the narrow cone. The narrow one can go really deep even in shallow waters and can also give information on the composition of the bottom.
Raymarine’s DragonFly 4 PRO with Navionics Plus Mapping offers Dual-Channel Sonar with CHIRP DownView enabling easy identification of fish and underwater structure with photo-like images. Reaching depths of 600ft with CHIRP DownVision and 900ft with CHIRP Sonar the DragonFly 4 includes a built in GPS receiver and provides accurate coastal navigation data all on a 4.3” Color Display.
A fish hook is a device for catching fish either by impaling them in the mouth or, more rarely, by snagging the body of the fish. Fish hooks have been employed for millennia by anglers to catch fresh and saltwater fish. Early hooks were made from the upper bills of eagles and from bones, shells, horns and thorns of plants (Parker 2002). In 2005, the fish hook was chosen by Forbes as one of the top twenty tools in the history of man. Fish hooks are normally attached to some form of line or lure device which connects the caught fish to the angler. There is an enormous variety of fish hooks. Sizes, designs, shapes, and materials are all variable depending on the intended purpose of the hook. They are manufactured for a range of purposes from general fishing to extremely limited and specialized applications. Fish hooks are designed to hold various types of artificial, processed, dead or live baits (bait fishing); to act as the foundation for artificial representations of fish prey (fly fishing); or to be attached to or integrated into other devices that represent fish prey (lure fishing).
Your fishfinder needs to accomplish two objectives: find the fish and help you record where they like to hide at your favorite fishing spot. In both respects, Garmin’s Striker 7SV definitely delivers the goods and then some. This superior scanning sonar gives one of the most complete images available of what is in the water around you and how deep the fish are hiding in real time with near-photographic detail. In terms of an easy to use interface, this model uses dedicated navigation and function buttons to provide reliable responses for more intuitive operation even by novice users.
BABY STEPS: You don't have to spend a ton of money or be an engineer to get your kayak electrified. Here we have the Lowrance X50DS. The fishfinder and the installation kit will run around $250. Look at what you spend for a rod/reel/braided line, and you'll find this kit is certainly affordable. The display is 4-level grayscale, and the battery pack contains AA batteries. However, what it may lack in fashion it makes up by function. The battery pack goes in a dry bag, and the unit itself is easily removed at the end of the day. It features a built in temperature sensor and 120 degrees of wide angle coverage.
Portable fish finders are the better choice for those who lease their boat. Also if you ice fish or “fly-in” fish, a portable unit would be more suitable for you. They usually come with their own carrying case and battery power supply. Most of the fish locators come with the transom mount for installation. The portable units come with the transducer already attached to the transom with the use of a suction cup.
Networked system: Fully networked systems are available from all the major suppliers, and usually will support a huge range of data sources including radar, raster and vector GPS charts, video, and SiriusXM satellite radio. Many allow Bluetooth/WiFi, and you can control them from your iPhone or Android smartphone. Your fishfinder, often an external “black box” module, is just one of these sources of data. Multiple-display network systems are great for medium-sized or large vessels. Capabilities get more amazing every year.
MOUNTING THE FISHFINDER: Cockpit space in any paddle craft is premium real estate, so definitely do some planning before you do some drilling. The carpenters pencil is your friend in this case. I suggest that before you drill/cut, you spend some time on the water and use that pencil to mark up potential mounting spots. You have to be able to see it well and to reach it, but it needs to be out of the way when you cast, land a fish, or get in/out of your boat. If your boat has some sort of console, that's an obvious mounting choice. But, if you don't then Ram Mounts offers a number of multi-position solutions that will allow you to mount it just about anywhere. Once you decide where it will go, you have to get the wiring to the battery and to the transducer.
NO INSTALLATION REQUIRED: That got your attention, didn't it? If you're on a budget, and don't want any sort of permanent installation mods to your boat, the Humminbird Smartcast series may be your answer. You simply cast the green transducer to the spot where you want to investigate, and the signal comes back to the wrist module (RF30) or the traditional display model (RF15). This series doesn't have a lot of bells and whistles, but for my kind of fishing/paddlecraft, it may be a great solution.
WIRING: It's like Christmas lights … once you get a good power source you can really go crazy. I guess that's one of the reasons I've never added a power grid to one of my boats. Sure as I do, I'll have dash lights, bow/stern lights, and an 18" subwoofer (though a pair of 10's would probably work just as well). Once you are set up with a 12 volt system, anything that will connect on a go-boat will now connect in your row-boat. Those are scary possibilities indeed. You'll need to keep the battery stationary, as dry as possible, and make it easy to get at for removal and recharging. The easiest choice would be to mount it in the front hatch area. The battery is actually pretty small, so you won't need a lot of room.
Transducers: Fishfinders operate using a single frequency transducer, dual frequencies, multiple frequencies or a broadband CHIRP system. In general, higher frequencies give the finest detail resolution, the least background noise on your screen and the best view from a fast-moving boat, but don’t penetrate as deeply as lower frequencies. Shallow-water inland anglers generally choose higher frequencies of 200kHz, 455kHz or 800kHz. For maximum depth, use lower frequencies. We recommend 200kHz or higher (up to 800kHz) for water depths up to 200' and 80kHz or 50kHz for deeper waters.
PERMANENT INSTALLATION: I say an installation is permanent once you start drilling holes. A permanent installation will require you to provide power/wiring, physically mount the transducer, and mount the fish finder itself. A few years ago, these things were a lot tougher to do - similar to baking a cake from scratch. I don't like the notion of "trial and error" when I have a drill in my hand. But now that our sport has become more mainstream, products are being offered specifically for kayaks, and fish finder installation can be so easy, even Betty Crocker could do it.
It terms of the functionality, the HDS-7 is able to connect to the internet to broadcast data, update to new software, upload information such as marked coordinates and more. This Lowrance model uses the latest of advanced technologies such as CHIRP sonar, Broadband sounder, StructureScan HD, DownScan imaging and Trackback view for the ultimate fish finding experience.
Offering popular premium features at a more affordable price than any display in its category, Elite Ti2 gives anglers a level of powerful fishfinding and navigation functionality usually reserved for more expensive fishfinder/chartplotters. From Active Imaging™ support , FishReveal™ and built-in Genesis Live onscreen mapping to features that make your life easier on the water, like an easy-to-use touchscreen, wireless networking, smartphone notifications and trolling motor/Power Pole® integration – Elite Ti2 was designed to help you have an easier time finding fish.
A fish finder is a sonar instrument that is designed for the specific purpose of detecting fish underwater. It does so by detecting reflected impulses of sounds energy. All the electronic impulses that are reflected off fish are converted into information that is then display in graphic rendition on the screen of the fish finder. In addition to locating fish, these units also measure the depth of the water, locating underwater debris, and bottom structure. The image on the screen of the fish finder can represent just one fish in the form of a small icon or with a series of arches.
Kiss has collectable action figures. Does Madonna have action figures? Eh, better not answer that one. Back in the day, I was a member of the Kiss Army. What sort of fan club does Madonna have? Better step away from that one too. Pluto will always be a planet to me, and Kiss is already in *my* rock and roll hall of fame. I love the smell of flamethrowers and flash pots in the morning … smells like … victory.
If you click the "add to Cart Button" on our website, information on accessories, shipping prices and more will be provided. Please note that clicking on the "add to cart" button only places the item in your "shopping cart" there is no obligation to buy unless you complete the ordering process. At the GPS Store, Inc. we always strive to provide our customers with great value. We believe that our combination of price, knowledge and customer service is the best that you will find anywhere.
Simrad’s GO9 XSE Combination GPS/ Fishfinder offers a networkable 9” Touchscreen unit at an affordable price point. An Internal 10Hz GPS Receiver quickly and accurately locates position on the included C-Map Pro Charting while the included TotalScan Transom Mount Transducer provides detailed underwater images. Compatible with detailed mapping from C-MAP MAX-N, Navionics, Insight, Insight Genesis, and NV Digital Charts.
Whatever species you are hunting, knowing the hardness of the lake bottom and its consistency is another key piece of knowledge when you are trying to crack the code and get the fish biting.There are 3 factors to consider when working out if the bottom displayed on your fish finder is hard or soft: bottom colour, bottom thickness, and the presence of a 2nd bottom return or not.
Check out our Factory Outlet Store where you can find all of our recertified marine electronics. Items and quantities are limited, so do not hesitate if you find and item you are looking for. Recertified products are restored to like new condition and carry a 90 day warranty, so you know you are getting one heck of a deal. If you have any questions you can always contact our support team via our support ticket system at support.norcrossmarine.com. We are always happy to troubleshoot and answer any questions you may have.
A fishing rod is an additional tool used with the hook, line and sinker. A length of fishing line is attached to a long, flexible rod or pole: one end terminates with the hook for catching the fish. Early fishing rods are depicted on inscriptions in ancient Egypt, China, Greece and Rome. In Medieval England they were called angles (hence the term angling). As they evolved they were made from materials such as split Tonkin bamboo, Calcutta reed, or ash wood, which were light, tough, and pliable. The butts were frequently made of maple. Handles and grips were made of cork, wood, or wrapped cane. Guides were simple wire loops.