Points are more gradual than drop offs, but spotting them is just as easy (see the screen shot below). Make sure you maintain a steady speed when trolling or reeling so you get an accurate reading on how steep the incline is. You should scan with a narrow sonar beam to get the clearest reading, and to ensure you see any shelfs or humps which wider beam scanning might not pick up (our page onhow sonars workexplains why this is).
Shipping is always free for parts and accessories for all our Marine Electronics. We have just about any replacement part that you would need to repair your HawkEye product, and a vast amount of marine accessories to customize your boating and fishing experience. Whether you are looking into our cable float kit or replacement lens for your hand held depth sounder, we have it all.
Paddling.net has always given me plenty of room to not only discuss paddle fishing things, but other worldly things as well. So, with colder weather upon us and fewer fishing opportunities available, I figured I might as well take full advantage of that luxury and devote an installment to those "other" things. You know, like politics, religion/faith (the huge difference between them), family, crime/punishment, and why Kiss still isn't in the rock and roll hall of fame.

Lowrance hds 7 gen 2 touch. Took it off my boat when I got low balled on price of boat.... I think it has less the an hour on it... I honestly dont remember using it at all. Regardless, it has very very low hours if it was used at all. No ducer, wire or mounts come with this. Buyer of my boat literally handed me cash that was 500.00 short so I took it, unplugged this and walked away. Perfect for someone that already has lowrance set up on boat. Selling with no reserve. So good luck.
Setting your tip-up baits at the proper depth requires a little work. Then every time you catch a fish or check your bait, you need to reset them. If you’ve got a few nickel-size buttons, those resets become no chore at all. Start by running your main line through one hole in the button and out another. This should allow you to move the button up and down the line easily, but provide enough tension to stop it from sliding on its own. Next, attach your egg sinker, barrel swivel, leader, and hook to the line. Once your depth is set, simply slide the button down to the water’s surface, and then reel the button up to the tip-up’s line guide. Now every time you reset your line after catching a fish or changing bait, wind the spool until the button is at the tip-up guide. Your bait will be set in the same place within the water column every time.
If I'm scouting a new area I won't know anything about what sort of structure is ahead until I paddle over it, blowing out any fish that may have been there. With this little guy, I could cast it to the spot, get a read on what's below and proceed. And, you have the luxury of retrieving it slowly to see bottom contours between you and that fishy spot. There have been a number of occasions when I've made numerous casts at a fishy looking location (without any luck), only to paddle over there and discover that it was 10" deep, nobody home.
The use of the hook in angling is descended, historically, from what would today be called a "gorge". The word "gorge", in this context, comes from an archaic word meaning "throat". Gorges were used by ancient peoples to capture fish. A gorge was a long, thin piece of bone or stone attached by its midpoint to a thin line. The gorge would be fixed with a bait so that it would rest parallel to the lay of the line. When a fish swallowed the bait, a tug on the line caused the gorge to orient itself at right angles to the line, thereby sticking in the fish's gullet.
† In the form of electronic Canadian Tire Money® (CT Money®). To collect bonus CT Money you must present a Triangle Rewards card/key fob, or use any approved Cardless method, at time of purchase or pay with a Triangle Mastercard®, Triangle World Mastercard® or Triangle World Elite Mastercard®. You cannot collect paper Canadian Tire Money on bonus offers. Any bonus multiplier is based on the base rate of collecting CT Money, and will be added to whatever the Member would otherwise collect, without the bonus. Not all items sold at Canadian Tire are eligible to earn CT Money. Terms and conditions apply to collecting and redeeming. Visit triangle.com for more information. The offered rate is exclusive of any bonus or promotional offers or redemption transactions. CT Money is collected on the pre-tax amount of the purchase. Bonus CT Money collected from online orders will be applied to the member’s triangle rewards™ account within 5 weeks of the purchase date.
Power output is measure in watts, often represented by the “W” symbol. With more power you’ll get clearer, more-accurate readings, and you’ll be able to find fish in deeper water. Units with limited power won’t always send the signal out far enough and you can get poor quality images. Look closely for a good power output and frequency options. The right combination can help you choose the right unit, based on overall ability. You’re looking for balance of depth, power and clarity of image.
NO INSTALLATION REQUIRED: That got your attention, didn't it? If you're on a budget, and don't want any sort of permanent installation mods to your boat, the Humminbird Smartcast series may be your answer. You simply cast the green transducer to the spot where you want to investigate, and the signal comes back to the wrist module (RF30) or the traditional display model (RF15). This series doesn't have a lot of bells and whistles, but for my kind of fishing/paddlecraft, it may be a great solution.
How to choose a fish finder? There are so many fish finder brands and models of fish locators available that it can be quite difficult to figure out which one would best meet your needs and your individual fishing style. Moreover, it’s also easy to get lost in transducers, echoes, sonar, flashers and transom mounts. The most important thing to keep in mind when choosing a good fish finder is the question: will it help you to catch more fish? To make this choosing process less complicated and so you can understand more about fish detector features we have compiled this buying guide. Using this information will help you to make the best choice.
There are a lot of good reasons to make sure your fish finder has GPS built into it, with the biggest being improving your fishing techniques and mapping all the data you could want as a fisherman. Each of these options have some great benefits to them, so pick the one that is in the right price range for you! A good rule of thumb is the more you pay, the better mapping options you are going to get, so please remember this if that is an important feature for you!

Simrad’s GO9 XSE Combination GPS/ Fishfinder offers a networkable 9” Touchscreen unit at an affordable price point. An Internal 10Hz GPS Receiver quickly and accurately locates position on the included C-Map Pro Charting while the included TotalScan Transom Mount Transducer provides detailed underwater images. Compatible with detailed mapping from C-MAP MAX-N, Navionics, Insight, Insight Genesis, and NV Digital Charts.
Few things aggravate ice anglers more than frozen rod guides. Chipping away with fingernails, teeth, or anything else lying around can easily damage both the frame and rings of the guides, but you have to keep them clear because iced guides will weaken line, especially super-­light monofilament or fluorocarbon. There are a number of homebrew remedies for tackling this problem, but none are more effective than lip balm, which creates a film on guides that inhibits them from freezing and building ice. It’s waterproof and takes quite a while for wet line or precipitation to break it down and necessitate reapplication. A small stick or tin stores easily in your pocket, and just a few swipes with your finger on guide rings will protect them from ice-up for several hours.
However, fish finders for professional use, i.e., those used by commercial fishermen, can make use of other frequencies. Such frequencies include 15, 22, 28, 38, 45, 50, 68, 75, 88, 107, 150 and 200 kHz. There are some special fish finders that utilize the frequency of 400 kHz, but it is quite a rare case. As you can see, there is an extensive range of configurable frequencies available for fish finders for fishery vessels, and a fish finder generally makes use of a combination of two frequencies (high and low frequencies). The selection of the frequencies depends upon the intended purposes of the fish finder, which include, inter alia, finding specific fish species; grasping the seabed condition; conducting a wide-area-search with the search angle of 90 degrees at one go; conducting detailed search for fish schools; detecting fish schools that give weak echo returns; avoiding interference/conflict with other fish finders used nearby. The searchable range (depth) and search area are dependent upon the frequency used. On the one hand, high frequency ultrasound is suitable for a detailed search, although it cannot be used for search in deep water. Low frequency ultrasound, on the other hand, is suited for general searches in a wider area as well as searching in deep water.
We’re only slightly kidding when we say that one of the simplest ways to pick a transducer is to decide just how big of a hole you want to drill in your boat. Fishfinders intended for the small-boat, freshwater angler often come with a transducer, usually a transom-mount type. But many transducers are purchased separately and need to be installed through the hull.
BUT DOES A FISHFINDER REALLY FIND FISH? Does a woodchuck really chuck wood? Sorry jackwagon, I had to go there. A fishfinder works on the same theory as deep space telescopes identifying distant stars. It doesn't see "fish" but it does see things that don't look like water. Once the data is processed, the resulting image is therefore labeled fish. Therefore, these units absolutely process the data and tell you if fish are in the beam. But alas, they don't know what they're eating, or if they're even in the mood to eat. But, I do believe that fish will almost always eat if given the right offering. But, you have to find them first.
2-4 PERSON CAPACITY: Comfortably sized 2-4 people capacity including set-up dimensions of 81" x 71" and 71" high with plenty of room to fish and even stand up inside of.|POP-UP STYLE SETUP: Sets up super quick and tears down just as easily by simply pulling up on the roof and then on all four sides so youÆll be good to go in minutes.|FULLY INSULATED FABRIC: Features 300 denier insulated oxford fabric with frost-resistance up to 22 degrees Fahrenheit to keep you warm no matter the weather.|DURABLY DESIGNED: Includes solid fiberglass poles, diecast hubs, and heavy duty zippers designed for repeated use plus 4 strong ground stakes and 4 pull ropes.|WELL-VENTILATED ACCESS: Two zippered doors on opposite ends and hook and loop fastened windows allow for easy access and provide a well-ventilated.
×