The common earthworm is a universal bait for fresh water angling. In the quest for quality worms, some fishers culture their own worm compost or practice worm charming. Grubs and maggots are also considered excellent bait when trout fishing. Grasshoppers, flies, bees and even ants are also used as bait for trout in their season, although many anglers believe that trout or salmon roe is superior to any other bait. Studies show that natural baits like croaker and shrimp are more recognized by the fish and are more readily accepted. A good bait for red drum is menhaden.[5] Because of the risk of transmitting whirling disease, trout and salmon should not be used as bait.

As with many products, you’ll have to pay close attention to the specific features delivered for the price, simply because the investment for combination fishfinder and GPS can range from $500 to $1200 or more. Fishfinders and GPS units are well advanced when compared to equipment used just a few years ago. Most of the time you can get excellent 3D mapping, scanning, charting and navigation at a very reasonable price. It’s not necessary to spend hundreds more unless you really want to go after the top-of-the-line unit.
NO INSTALLATION REQUIRED: That got your attention, didn't it? If you're on a budget, and don't want any sort of permanent installation mods to your boat, the Humminbird Smartcast series may be your answer. You simply cast the green transducer to the spot where you want to investigate, and the signal comes back to the wrist module (RF30) or the traditional display model (RF15). This series doesn't have a lot of bells and whistles, but for my kind of fishing/paddlecraft, it may be a great solution.
Fish icons are a useful tool when you are getting started with a sonar device: your fish finder interprets the sonar data it receives and tries to work out if it is a fish or not. It does this based on factors like the size of the object and the strength of the sonar return. In the case of Deeper sonars, we use an advanced algorithm in the Deeper App to interpret the data. Unfortunately, even the most advanced units aren’t 100% accurate in interpreting correctly.
A sinker or plummet is a weight used when angling to force the lure or bait to sink more rapidly or to increase the distance that it may be cast. The ordinary plain sinker is traditionally made of lead. It can be practically any shape, and is often shaped round like a pipe-stem, with a swelling in the middle. However, the use of smaller lead based fishing sinkers has now been banned in the UK, Canada and some states in the USA,[4] since lead can cause toxic lead poisoning if ingested. There are loops of brass wire on either end of the sinker to attach the line. Weights can range from a quarter of an ounce for trout fishing up to a couple of pounds or more for sea bass and menhaden.
Higher frequency transducers have shorter wavelengths and more wave cycles per second, which means you can visualize more details (smaller fish) but have only shallow to moderate depth capacity. One sound wave at 200kHz is slightly longer than 1/4", so a 200kHz sound wave will be able to detect fish as short as a quarter of an inch. A 200kHz transducer has a range of only about 600'. High frequency provides a crisp, clear picture of the bottom with the tradeoff of less depth range. For best resolution, choose 800kHz or 455kHz transducers.
A fish hook is a device for catching fish either by impaling them in the mouth or, more rarely, by snagging the body of the fish. Fish hooks have been employed for millennia by anglers to catch fresh and saltwater fish. Early hooks were made from the upper bills of eagles and from bones, shells, horns and thorns of plants (Parker 2002). In 2005, the fish hook was chosen by Forbes as one of the top twenty tools in the history of man.[2] Fish hooks are normally attached to some form of line or lure device which connects the caught fish to the angler. There is an enormous variety of fish hooks. Sizes, designs, shapes, and materials are all variable depending on the intended purpose of the hook. They are manufactured for a range of purposes from general fishing to extremely limited and specialized applications. Fish hooks are designed to hold various types of artificial, processed, dead or live baits (bait fishing); to act as the foundation for artificial representations of fish prey (fly fishing); or to be attached to or integrated into other devices that represent fish prey (lure fishing).
These units are battery operated and the signal is transmitted back to the receiver. So, don't expect a lot of range or HD resolution. But, if you simply want to know how deep the water is ahead of you so that you can make better choices, this is it. For me, I would need to cast it with a rod/reel loaded with heavy braid. The areas I'd likely cast to would hopefully hold big snook and in the spring they love this color. I don't want the "dog ate my homework" story to become the "snook ate my transducer" story.
Choosing the perfect fish finder for your requirement is hard with many features such as imaging, power and more. The main purpose of a fish finder is to catch more fish with the screen displaying the fish and underwater structure and physical objects. Other information such as water temperature and depth are common on the majority of devices with many high end fish finders providing much more.

The depth scale on the right of the screen enables you to identify the depth of any features you find. The depth reading in the top right of the screen shows you the bottom depth under your fish finder right now – bear in mind this is not necessarily the same depth as the features you have just scanned, especially if you are scanning drop offs or points.
CHIRP devices can transmit simultaneously on high and low frequencies. The lower frequency gives greater depth penetration, and it requires less power than a higher frequency signal so it generates less noise. The result is a “whisper into the water” that locates the fish without disturbing them. The higher frequency signal gives even finer detail at shallow to mid-water depths.

Important parameters of a fishing line are its breaking strength and its diameter (thicker, sturdier lines are more visible to fish). Factors that may determine what line an angler chooses for a given fishing environment include breaking strength, diameter,castability, buoyancy, stretch, color, knot strength, UV resistance, limpness, abrasion resistance, and visibility.
Just getting started using a fish finder? Know the basics but want to get more out of your fish finder? Not sure you’re reading your fish finder display correctly? Don’t worry, we’re here to help. This short tutorial will teach you how to make sense of your fish finder display so you can tell what’s a bait fish, what’s a trophy catch and what’s just a submerged tree that you’ll snag on. Take just 7 minutes to go through this tutorial and at the end you’ll be able to read your fish finder display for:
Humminbird 140C Fishin’ Buddy is one of the top rated fish finders among the portable type. So you can use it on your boat, on the leased boat, on the dock or for fishing from anywhere else. To use the device you won’t need to do any rigging or wiring. Instead it uses extendable transducer tube housing with the length suitable for most small and mid-sized boats.
The colour on your display is crucial here for identifying a brush and logs. Because they will send a different frequency of sonar return, your fish finder will show them in a different color to the bottom (otherwise, it will just look like a hump). So make sure you choose a color palette that will highlight this difference. In the Deeper App, choose either the Classic color mode (where brush and logs will show green, like vegetation) or the Day color mode (where they will show purple).
Fishing traps are culturally almost universal and seem to have been independently invented many times. There are essentially two types of trap, a permanent or semi-permanent structure placed in a river or tidal area and pot-traps that are baited to attract prey and periodically lifted. They might have the form of a fishing weir or a lobster trap. A typical trap can have a frame of thick steel wire in the shape of a heart, with chicken wire stretched around it. The mesh wraps around the frame and then tapers into the inside of the trap. When a fish swims inside through this opening, it cannot get out, as the chicken wire opening bends back into its original narrowness. In earlier times, traps were constructed of wood and fibre.

A fish finder is an incredible tool that can help take your sport or commercial fishing venture to the next level. However, even the best fish finders can use a little improvement – and adding a GPS is one way to do this.The best fishfinder GPS combo will help you navigate whatever body of water you are on at the same time as it allows you to find where to fish more quickly, accurately and efficiently.
2. Save numerous locations and data for accurate and successful fishing next time out – You navigate quickly and accurately to your top fishing spot, then save the locations so you can return to them later. Reduction in physical size has been accompanied by massive increases in computer memory, so you can have the information on numerous locations ready to use every time you go, no matter where you go.
You want to turn the fish finder on. It will be set in automatic mode already, with the pre-program settings already on. You can switch it to a manual mode at any time to customized the finder. When you first turn it on, you can leave it in the automatic mode. You then want to drive on the water in automatic mode to get an idea of what it’s seeing.
Fish icons are a useful tool when you are getting started with a sonar device: your fish finder interprets the sonar data it receives and tries to work out if it is a fish or not. It does this based on factors like the size of the object and the strength of the sonar return. In the case of Deeper sonars, we use an advanced algorithm in the Deeper App to interpret the data. Unfortunately, even the most advanced units aren’t 100% accurate in interpreting correctly.

The depth scale on the right of the screen enables you to identify the depth of any features you find. The depth reading in the top right of the screen shows you the bottom depth under your fish finder right now – bear in mind this is not necessarily the same depth as the features you have just scanned, especially if you are scanning drop offs or points.


The thickness of the line representing the bottom is also a great clue to bottom hardness. Here the rule is simple – the thicker the line, the harder the bottom. But, be careful – sonar sensitivity can affect how thick the line is. The Deeper display has adjustable sensitivity. So if you turn up the sensitivity to 100%, the bottom line may appear thicker, if you turn it down to 10% it may appear thinner. So practice adjusting the sensitivity and get used to judging how much the bottom thickness varies based on this.

Create memorable fishing experiences with the incredible selection of equipment and accessories at Academy. From rods, reels, and baits to storage, care, and apparel, we have fishing gear you need to stay prepared. Facing unpredictable weather or getting up close in the water? Shop our assortment of apparel and waders that will help keep you dry and comfortable. Go high-tech with various fish-finding equipment that can help you track and secure the best catch. We also offer practical fishing equipment like lights, fish processing tools, nets, baskets, grippers, bait traps, and other miscellaneous tools you'll want on hand. Whether you're a casual fisher or an avid adventurer, you'll be able to find the exact things you need to make the most of your fishing expedition. Create the best memories with family and friends, or take to the great outdoors by yourself. No matter your fishing style, there's something for you. Shop our diverse collection today to find high-quality products from brands you can trust.
×