A compact, affordable combination GPS/Fishfinder. Simrad’s GO 5XSE is an all in one solution to quality chartplotting and sonar. The included Med/High/DownScan transducer provides exceptional sonar imaging in near-photo like detail. Multiple Charting options from Insight, Navionics and C-Map enable the Simrad GO5 to go anywhere the water takes you.
When compared to other finders, this screen is relatively small, but it still gets the job done. Since it’s in full color and has high contrast, you can still see everything quite clearly. The only downside is that you have to switch between menus, which can be a problem if you are trying to find fish and mark your location. Overall, it’s not necessarily a deal breaker, but it may be enough to warrant a larger screen. Fortunately, the Striker can come in bigger sizes if you want to upgrade.
MOUNTING THE FISHFINDER: Cockpit space in any paddle craft is premium real estate, so definitely do some planning before you do some drilling. The carpenters pencil is your friend in this case. I suggest that before you drill/cut, you spend some time on the water and use that pencil to mark up potential mounting spots. You have to be able to see it well and to reach it, but it needs to be out of the way when you cast, land a fish, or get in/out of your boat. If your boat has some sort of console, that's an obvious mounting choice. But, if you don't then Ram Mounts offers a number of multi-position solutions that will allow you to mount it just about anywhere. Once you decide where it will go, you have to get the wiring to the battery and to the transducer.
BABY STEPS: You don't have to spend a ton of money or be an engineer to get your kayak electrified. Here we have the Lowrance X50DS. The fishfinder and the installation kit will run around $250. Look at what you spend for a rod/reel/braided line, and you'll find this kit is certainly affordable. The display is 4-level grayscale, and the battery pack contains AA batteries. However, what it may lack in fashion it makes up by function. The battery pack goes in a dry bag, and the unit itself is easily removed at the end of the day. It features a built in temperature sensor and 120 degrees of wide angle coverage.
For precise detection of structures and fish, our Raymarine radar bundle gives you remarkable resolution. The Garmin Chartplotter radar combo updates your position 10 times per second to accurately maintain your heading. A large screen with an outstanding LED display on our Humminbird fish finder GPS provides images that are easy to read even in bright sunny conditions. You can find the best marine depth finder GPS combo here, and we stand behind all of our products with a 30-day guarantee against defects. Contact our team of experts if you should need any assistance in finding the products you require.
The side scan will scan much more around the boat but are not as effective, especially in deep water. For this reason alone, you may feel the need to buy two seperate fish finders but some premium models have both side and down scanning capabilities. This means you can usually view both at the same time for a very detailed scan around the boat in all directions.

These are very valuable features to target for a range of species, and the good news is, they are easy to spot with a fish finder. As you troll or reel in your device, you will see the depth contour change – don’t forget to use the depth reader on your display (on the Deeper App it’s in the top right corner of the screen) so you can track how quickly the depth is rising or falling.


In operation, an electrical impulse from a transmitter is converted into a sound wave by an underwater transducer, called a hydrophone, and sent into the water.[3] When the wave strikes something such as a fish, it is reflected back and displays size, composition, and shape of the object. The exact extent of what can be discerned depends on the frequency and power of the pulse transmitted. Knowing the speed of the wave in the water, the distance to the object that reflected the wave can be determined. The speed of sound through the water column depends on the temperature, salinity and pressure (depth). This is approximately c = 1404.85 + 4.618T - 0.0523T2 + 1.25S + 0.017D (where c = sound speed (m/s), T = temperature (degrees Celsius), S = salinity (per mille) and D = depth).[4] Typical values used by commercial fish finders are 4921 ft/s (1500 m/s) in seawater and 4800 ft/s (1463 m/s) in freshwater.

The Axiom 9RV from Raymarine is a top of the line 9” Multi-Function Display with RealVision Sonar and comes packed with an RV-100 Transom Mount Transducer. The included RV transducer will provide CHIRP DownVision, CHIRP SideVision, High Frequency CHIRP and RealVision 3D all in one. Detailed U.S and Canadian Mapping for Coastal and Lake water is also included with Navionics+ Mapping.
The temperature and pressure sensitivity capability of fish finder units allow one to identify the exact location of the fish in the water by the use of a temperature gauge.Functionality present in many modern fish finders also have track back capabilities in order to check the changes in movement in order to switch position and location whilst fishing.
Early sporting fathometers for recreational boating used a rotating light at the edge of a circle which flashed in sync with the received echo, which in turn corresponded to depth. These also gave a small flickering flash for echos off of fish. Like today's low-end digital fathometers, they kept no record of the depth over time and provided no information about bottom structure. They had poor accuracy, especially in rough water, and were hard to read in bright light. Despite the limitations, they were still usable for rough estimates of depth, such as for verifying that the boat had not drifted into an unsafe area.
A fishing rod is an additional tool used with the hook, line and sinker. A length of fishing line is attached to a long, flexible rod or pole: one end terminates with the hook for catching the fish. Early fishing rods are depicted on inscriptions in ancient Egypt, China, Greece and Rome. In Medieval England they were called angles (hence the term angling). As they evolved they were made from materials such as split Tonkin bamboo, Calcutta reed, or ash wood, which were light, tough, and pliable. The butts were frequently made of maple. Handles and grips were made of cork, wood, or wrapped cane. Guides were simple wire loops.
When it comes to fish finders and fishing GPS technology, the HELIX 5 delivers some of the best in functionality and creating a seamless user experience for fishing pros and hobbyists. This unit uses precise broadband CHIRP, a Reflex interface, imaging sonar and the power to chart and create maps using Auto Chart Live. The HELIX 5 has taken what is already a premier fish finder tool, and taken it to new heights in terms of features and creating an even better user interface. The display looks rich and clear, and is powered with 4,000 watts of PTP power output.
You want to turn the fish finder on. It will be set in automatic mode already, with the pre-program settings already on. You can switch it to a manual mode at any time to customized the finder. When you first turn it on, you can leave it in the automatic mode. You then want to drive on the water in automatic mode to get an idea of what it’s seeing.
Commercial fishermen also make use of these characteristics. They conduct a search by low frequency (i.e., 15 kHz) beams first to grasp the general locations of fish schools around the boat. Subsequently, they narrow the search area for a fish school, using high frequency beams (200 kHz), to detect the exact location of the fish school and operate the boat to be directly above the targeted fish school.
MOUNTING THE FISHFINDER: Cockpit space in any paddle craft is premium real estate, so definitely do some planning before you do some drilling. The carpenters pencil is your friend in this case. I suggest that before you drill/cut, you spend some time on the water and use that pencil to mark up potential mounting spots. You have to be able to see it well and to reach it, but it needs to be out of the way when you cast, land a fish, or get in/out of your boat. If your boat has some sort of console, that's an obvious mounting choice. But, if you don't then Ram Mounts offers a number of multi-position solutions that will allow you to mount it just about anywhere. Once you decide where it will go, you have to get the wiring to the battery and to the transducer.
Kiss has collectable action figures. Does Madonna have action figures? Eh, better not answer that one. Back in the day, I was a member of the Kiss Army. What sort of fan club does Madonna have? Better step away from that one too. Pluto will always be a planet to me, and Kiss is already in *my* rock and roll hall of fame. I love the smell of flamethrowers and flash pots in the morning … smells like … victory.
A fishing rod is an additional tool used with the hook, line and sinker. A length of fishing line is attached to a long, flexible rod or pole: one end terminates with the hook for catching the fish. Early fishing rods are depicted on inscriptions in ancient Egypt, China, Greece and Rome. In Medieval England they were called angles (hence the term angling). As they evolved they were made from materials such as split Tonkin bamboo, Calcutta reed, or ash wood, which were light, tough, and pliable. The butts were frequently made of maple. Handles and grips were made of cork, wood, or wrapped cane. Guides were simple wire loops.
×