The thickness of the line representing the bottom is also a great clue to bottom hardness. Here the rule is simple – the thicker the line, the harder the bottom. But, be careful – sonar sensitivity can affect how thick the line is. The Deeper display has adjustable sensitivity. So if you turn up the sensitivity to 100%, the bottom line may appear thicker, if you turn it down to 10% it may appear thinner. So practice adjusting the sensitivity and get used to judging how much the bottom thickness varies based on this.
When compared to other finders, this screen is relatively small, but it still gets the job done. Since it’s in full color and has high contrast, you can still see everything quite clearly. The only downside is that you have to switch between menus, which can be a problem if you are trying to find fish and mark your location. Overall, it’s not necessarily a deal breaker, but it may be enough to warrant a larger screen. Fortunately, the Striker can come in bigger sizes if you want to upgrade.
Detection range (depth) of a fish finder depends upon the frequency used for ultrasound transmission. In principle, the higher the frequency of ultrasound, the shorter the propagation range can be. The wavelength of high frequency ultrasound is short, and its directivity angle is narrow, which enables detailed searches, but it attenuates significantly while travelling through water. Low frequency ultrasound is characterised by its long wavelength, wider directivity angle and high level of tolerance toward underwater attenuation, hence enabling wide-area-searches in deeper water. To summarize, you can choose low frequency if you are searching in deep water and high frequency if you are conducting a detailed search in shallow water. Further, when using low frequency ultrasound, you may be able to conduct more precise deep-water searches by adding an optional Power Adapter, which amplifies the transmitter power to a few kilowatts. Please note, however, that when using the Power Adapter, a dedicated transducer capable of handling higher transmitter power will be needed.
Here’s a useful tip for judging the width / thickness of a sonar return: switch on the vertical flasher (also know as a-scope) on your fish finder if it has one (to do this on the Deeper App, go to Settings > Sonar > Vertical Flasher). The vertical flasher on the right side of your screen will show you exactly what’s under your sonar at this exact moment. You can use it for vertical jigging, and of course forice fishingtoo. For judging fish size, look at both the thickness and width of the returns on your vertical flasher. A larger fish will give both a wider and a thicker return.
The CHIRP sonar that is built into this model is second to none in terms of performance, and always gives you a clear picture and measurement of the floor and surface beneath your boat, as well as the location of the fish around it. Another feature that we really enjoy about this Humingbird fish finder is that it comes with a built in SD card slot so that you can save your favorite waypoints to it. You can even upload additional maps to your software using the SD card feature.
Another great feature of the Elite-5X HDI is the Downscan Overlay that combines traditional sonar with Downscan. Downscan’s primary purpose is finding structure, but it can’t very accurately spot individual fish. That is better done by sonar. Combining the two in one, this device displays on one screen both bottom and structure. So you can see every rock and submerged object as well as fish.
It terms of the functionality, the HDS-7 is able to connect to the internet to broadcast data, update to new software, upload information such as marked coordinates and more. This Lowrance model uses the latest of advanced technologies such as CHIRP sonar, Broadband sounder, StructureScan HD, DownScan imaging and Trackback view for the ultimate fish finding experience.
Unless you know where fish are lurking, casting out anywhere on the water doesn’t necessarily guarantee a bite. Finding where the hot spots are will help you save time and money while fishing. That’s where fishfinders come in. An essential part of any modern angler’s arsenal, a fishfinder makes catching more fish easier. Fishfinders help you pinpoint the honey hole using SONAR so you can see where the fish are and at what depth they are hiding. No more wasting time, tackle or line on deserted spots in the water. From standalone units, fishfinder/GPS combos, networked or multi-function displays, West Marine offers a wide array of fishfinders from the top brands on the market today. Keep reading for tips on finding the right system for your boat.
Thru-hull: This means a threaded bronze, nylon or stainless steel shaft passes through the bottom surface of the hull. You have several styles to choose from: external football-shaped head with water flow smoothed by a fairing block that also corrects for the dead rise (sideways slope of the hull); or round mushroom head thru-hulls, either semi-flush or flush mounted. These are the most challenging to install, but likely to provide the best signal quality. Displacement power and sailboats generally use thru-hulls.
Fishing tackle boxes have for many years been an essential part of the anglers equipment. Fishing tackle boxes were originally made of wood or wicker and eventually some metal fishing tackle boxes were manufactured. The first plastic fishing tackle boxes were manufactured by Plano in response to the need for a product that didn't rust. Early plastic fishing tackle boxes were similar to tool boxes but soon evolved into the hip roof cantilever tackle boxes with numerous small trays for small tackle. These types of tackle boxes are still available today but they have the disadvantage that small tackle gets mixed up. Fishing tackle boxes have also been manufactured so the drawers themselves become small storage boxes, each with their own lids. This prevents small tackle from mixing, and can turn each drawer into a stand-alone container which can be used to carry small tackle to a rod some distance from the main tackle box.
Finally, we come to the HDS-7 from Lowrance. I have had limited experience with this company, but from what I know it is a fantastic maker of fish finders, and the HDS-7 is no exception. This particular model has a seven-inch touchscreen, which makes it one of the most high-tech options you can find anywhere. If you like a more ergonomic design and want something that is more user-friendly, the HDS-7 could be for you.
The final point to remember when you are looking out for fish arches is that it doesn’t need to be a full arch. Half arches (like the ones shown in the screen shot above) also show that there is fish. In ourtutorial on how sonars work, we explain in detail why sometimes you get a full arch and sometimes you get a half arch. The short answer is that you will get a full arch if a fish swims through the whole of your sonar cone, and a half or partial arch if they only swim through part of it.
Having a GPS onboard is something I've wanted for a while, so that makes the Humminbird 385CI a powerful combo to me. I love "jungle fishing", getting back in mangroves and other areas that are loaded with structure. It's also easy to get turned around in those areas because if you're concentrating on fishing it's easy to lose track of where you are, where you've been, and how to get back to the launch. Obviously, this will help. Between having built in navigational charts and doing your own recon concerning tides for the day, you can make better choices as to where you want to fish.
A fishfinder or sounder (Australia) is an instrument used to locate fish underwater by detecting reflected pulses of sound energy, as in sonar. A modern fishfinder displays measurements of reflected sound on a graphical display, allowing an operator to interpret information to locate schools of fish, underwater debris, and the bottom of body of water. Fishfinder instruments are used both by sport and commercial fishermen. Modern electronics allows a high degree of integration between the fishfinder system, marine radar, compass and GPS navigation systems.
ONE SMALL STEP FOR MAN, ONE GIANT LEAP FOR PADDLING_KIND: In the 2009 ICAST article, I mentioned a combo system that was in the new products exhibit, but wasn't available at the time of the show. It's most certainly available now, and that unit is the Humminbird 385CI. Like us, fish seek comfort, safety, and food. This unit will allow you to gather "data" that you can process in to fish finding "information".
The depth scale on the right of the screen enables you to identify the depth of any features you find. The depth reading in the top right of the screen shows you the bottom depth under your fish finder right now – bear in mind this is not necessarily the same depth as the features you have just scanned, especially if you are scanning drop offs or points.
In operation, an electrical impulse from a transmitter is converted into a sound wave by an underwater transducer, called a hydrophone, and sent into the water. When the wave strikes something such as a fish, it is reflected back and displays size, composition, and shape of the object. The exact extent of what can be discerned depends on the frequency and power of the pulse transmitted. Knowing the speed of the wave in the water, the distance to the object that reflected the wave can be determined. The speed of sound through the water column depends on the temperature, salinity and pressure (depth). This is approximately c = 1404.85 + 4.618T - 0.0523T2 + 1.25S + 0.017D (where c = sound speed (m/s), T = temperature (degrees Celsius), S = salinity (per mille) and D = depth). Typical values used by commercial fish finders are 4921 ft/s (1500 m/s) in seawater and 4800 ft/s (1463 m/s) in freshwater.
While many fish finders point directly underneath your boat, higher end units like this one will sweep to the sides as well. Considering that you are casting out from the ship rather than dangling lines beneath it, side sweeping is much more valuable as it allows you to find fish wherever you are, rather than finding them, moving the boat, and then trying to catch them.
Hockey tape was made for the ice, and even though hard-water anglers are looking for a different kind of score, they should always have a roll on hand. A few wraps around the butt and foregrip of any jigging rod immediately improves the hold and comfort, but hockey tape can be used on any ice tool. If you’ve ever had the cheap rubber handle cover disappear from your ice scooper, you know the feeling of metal freezing to a glove or the burning sting of touching it with your bare hand. A few wraps of hockey tape can easily fix that. Should your bibs or jacket get hooked or ripped, the hockey tape will keep a tear from getting worse until you can make a permanent repair.
The image above, at right, clearly shows the bottom structure—plants, sediments and hard bottom are discernible on sonar plots of sufficiently high power and appropriate frequency. Slightly more than halfway up from the bottom to the left of the screen centre and about a third away from the left side, this image is also displaying a fish – a light spot just to the right of a 'glare' splash from the camera's flashbulb. The X-axis of the image represents time, oldest (and behind the soundhead) to the left, most recent bottom (and current location) on the right; thus the fish is now well behind the transducer, and the vessel is now passing over a dip in the ocean floor or has just left it behind. The resulting distortion depends on both the speed of the vessel and how often the image is updated by the echo sounder.
Bright 10” Sunlight Viewable, Touchscreen Display. Garmin’s GPSMAP 7610xsv with 10Hz High Sensitivity GPS Receiver, Preloaded Coastal and Lake Mapping and Wi-Fi is a top choice combination unit for any mariner. New features to the 7610xsv include FLIR Camera Support, Smart Boundaries, and More.HD-ID Sonar, 1kW CHIRP, CHIRP DownVu and CHIRP SideVu built-in. Transducer Required and Sold Separately.
Fishing traps are culturally almost universal and seem to have been independently invented many times. There are essentially two types of trap, a permanent or semi-permanent structure placed in a river or tidal area and pot-traps that are baited to attract prey and periodically lifted. They might have the form of a fishing weir or a lobster trap. A typical trap can have a frame of thick steel wire in the shape of a heart, with chicken wire stretched around it. The mesh wraps around the frame and then tapers into the inside of the trap. When a fish swims inside through this opening, it cannot get out, as the chicken wire opening bends back into its original narrowness. In earlier times, traps were constructed of wood and fibre.
The swivel sinker is similar to the plain one, except that instead of loops, there are swivels on each end to attach the line. This is a decided improvement, as it prevents the line from twisting and tangling. In trolling, swivel sinkers are indispensable. The slide sinker, for bottom fishing, is a leaden tube which allows the line to slip through it, when the fish bites. This is an excellent arrangement, as the angler can feel the smallest bite, whereas in the other case the fish must first move the sinker before the angler feels him.